http://www.motorbikespecs.net/index.dyn?flag=2&model_id=5833984&make=Yamaha says 366 cc of SAE10W oil per fork leg Haynes manual specifies 486cc of SAE10W per fork leg for early (3DB1) models and 495 cc SAE10W per fork leg for later (3RN1 onward) models If you're looking for levels, you'll need to make a dipstick out of some wire. Haynes says the levels are 175mm for early(3DB1) models and 165.5mm for later(3RN1 onwards) models. From reading the manual I understand this level is measured with the top cap off the fork, and the chrome slider fully pushed down into the fork leg.. Then bend the wire over at the top (to stop it dropping inside the fork) and measure from the bend, down 175/165.5 mm down the wire, and mark the wire (flatten it with pliers) and cut it off a bit further down. Now use like a normal car dipstick.
70-75ml ATF
70-75ml ATF
130cc (ml) per leg.
No. The Yamaha YBR 125 has a four-stroke engine.
How much oil does a 2001 Yamaha TTR 125 hold? How much oil does a 2001 Yamaha TTR 125 hold? How much oil does a 2001 Yamaha TTR 125 hold?
yamaha xt 125 doesn't have oil filter.
what is the fork level height for a 1995 CR 125 honda
What is the spark plug gap for a 2006 yamaha ttr 125?
The 2009 Yamaha ttr 125 has a 1.6 gallon fuel tank.
It will not takeover
No
A Yamaha ttr 125 weighs just about 198 pounds and goes 65 mph