Young's modulus is determined experimentally by applying tensile strain (pulling on the ends) to a number of samples of the material under investigation and plotting the strain versus the elongation and taking the slope of the central part of the plot.
youngs modulus = tensile stress/tensile strian = F L / A delta L
we can find the young's modulus from graph by slope method.
By constructing the triangle between elastic region to yield region.
I don't think you can calculate it. You'll need to to a tensile test on a bone sample.
For a solid cable ( not twisted) the extension is PL/AE and strain is P/AE where P is force, A is area cross section, and E young's modulus
This is known as the Modulus of Elastisity, or Youngs Modulus (in tension/compression) and will be a constant as long as the deformation is in the elastic range.
young modulus remain unaffected ...as it depends on change in length ..
I think you mean "What variables affect young's modulus". Obviously not an english major!
Most riot shields list the material of construction as Lexan, the trade name for the polycarbonate polymer. The young's modulus of polycarbonate is 2.0-2.4 GPa (gigapascals).
en 24 is an alloy steel in the .40 carbon range. Young's modulus between 28 and 30 million PSI Tim Engleman
Young's modulus
Youngs Modulus
75gpa
This is known as the Modulus of Elastisity, or Youngs Modulus (in tension/compression) and will be a constant as long as the deformation is in the elastic range.
young modulus remain unaffected ...as it depends on change in length ..
I think you mean "What variables affect young's modulus". Obviously not an english major!
Young's modulus-205 kN/mm2 Poisson's ratio = 0.30
there are different types of modulus it depends on what types of stress is acting on the material if its direct stress then then there is modulus of elasticity,if tis shear stress then its modulus of rigidity and when its volumetric stress it is bulk modulus and so on
Metal is not a specific material, how is this ever going to be answered?!
Depends on the hardness of the formulation. Poisson's ratio depends mainly on the bulk modulus and slightly on the Youngs modulus at very low strains for the subject compound. If the Youngs modulus lies between 0.92 and 9.40MN/m², Poisson's ratio lies between 0.49930 and 0.49993.
G = E/2(1+u) where G = mod of rigidity and u =poisson ration and E = young modulus
The value for the cleavage plane (100) is 38 GPa and the value for the cleavage plane (001) is 33 GPa.