30:1
30:1
Mines about 11.8 gallons
To remove the gas tank on a 1997 Polaris Indy 500, first ensure the snowmobile is on a stable surface and the fuel is drained. Disconnect the fuel lines, electrical connections, and any mounting hardware securing the tank. Carefully lift the tank out, being mindful of any remaining connections. Reinstall in reverse order, ensuring all connections are secure.
The ratio is 40:1 on this snowmobile.
It seems like mine holds around 11 gallons.
40:1
40:1 from what I've read
On a 2006 Polaris 600 snowmobile, the fuel filter is typically located in the fuel line, near the fuel pump or in the fuel tank itself. To access it, you may need to remove the side panels or the seat, depending on the specific model configuration. Always refer to the owner's manual for precise location details and replacement instructions.
If you look straight ahead of your pull cord, you will see the fuel pump mounted to the side of your rewind housing, it is round with 5 hoses attached to it.
To drain fuel from a 2004 Polaris 600, start by ensuring the snowmobile is on a flat surface and the engine is cool. Locate the fuel line connected to the fuel tank, and use a siphon pump or disconnect the fuel line to let the fuel flow into a suitable container. If necessary, you can also remove the fuel tank for easier access. Always follow safety precautions and dispose of the fuel properly.
no oil goes in the crank case, it uses lubrication from the 2cycle oil injected into the fuel that runs through the crank area
take apart your fuel pump check for contamination , especially around the valves.Make sure your diaphrams are sealing properly.