Not enough info to answer. Please ask a new question and include year, make, model, and engine size.
It is the running pressure that the fuel pump puts out as measured in Pounds Per Square Inch. PSI
The fuel pump pressure sensor monitors the fuel pressure of the vehicle.
The fuel pump pressure sensor monitors the fuel pressure of the vehicle.
Do a fuel pressure check-no fuel pressure means defective fuel pump-
It pumps fuel at a higher pressure than a standard fuel pump.
The fuel pump switch is what tells the fuel pump what pressure to pump fuel into the fuel rail
Fuel pump pressure (Maximum) 75 psi
If you have power to the fuel pump and it will not run it is defective. If it runs but a fuel pressure test verifies that the fuel pressure is low and you replaced the fuel filter then the pump is defective.
Starts and stops the fuel pump depending on fuel pressure.
You will need to replace the fuel pump and filter, The fuel pump is what makes the pressure.
Check your fuel pressure. No pressure means the pump is not running or defective. Check for voltage at the pump harness and pump relay. If you have voltage and fuel pressure to spec, then you have some other issue, and the fuel pump is not the problem.
In most vehicles you can remove the fuel pump fuse or fuel pump relay as the engine is running, the engine will stall when the pressure is gone.
Have the fuel pressure checked. If the pump is noisy it is failing. do not forget to replace the fuel filter. A clogged fuel filter will appear as low fuel pressure, and overwork the pump.