Want this question answered?
Water pump attaching bolts: 30 ft-lbf Fan-to-water pump attaching bolts: 200 inch-pounds
Use a plus (+) symbol when attaching one or more sub elements of a similar function
Use a plus (+) symbol when attaching one or more sub elements of a similar function
Bolts
40 lbs on the water pump bolts
No, not on that year.
take off the bolts attaching the bed to the frame
The function of the root cap is to protect and cover the growing tip of the root.
2.8 V6 Engine: Connecting Rod Cap Nuts...37 Ft-lbs Main Bearing Cap Bolts....74 Ft-lbs
It's like a hub cap. They are smaller though and only cover the bolts.
You can make a fake wig by attaching weft hair extensions on a stocking cap. You can either glue or sew the tracks onto the cap to make a wig.
Disconnect the negative battery cable.Drain cooling system in to a drain pan.Remove the serpentine belt.Remove the heater hose and radiator hose.Remove the water pump cover attaching bolts and remove the cover.Remove the water pump attaching bolts and remove the water pump.To install:Position the water pump on the engine and install the attaching bolts. Tighten bolts to 89 inch lbs. (10 Nm).Install the water pump cover and attaching bolts.Install the heater hose and radiator hose.Install the serpentine belt.Connect the negative battery cable.Fill cooling system and check for leaks. Start the engine and allow to come to normal operating temperature. Recheck for leaks