Want this question answered?
For efficiency's sake, the outlet had best be a lot cooler.
outlet ports are smaller to reduce the exhaust losses
The ports of the angle valve ( Inlet and outlet) are oriented at an angle 90 deg.
Usually swapping the inlet and outlet connections will do this, depending on the design of the motor.
A pressure tank for a pump & well potable water system only has one connection. To connect the pump and tank to your house's water inlet, simply connect the tank and pump together with pressure rated pipe, SCH 40 PVC works fine. In that line, cut in a TEE fitting, and from that T, connect the house inlet with a valve to shut the water off.
Inlet line will be bigger then the outlet line. on the contrary on my motorcycle fuel pump, the inlet and outlet are the same size!
Inlet valve is open when piston moves from top dead center to bottom dead center inlet valve open and provide proper amount of fuel and air to the cylinder.
valve clearance hot - inlet mm 0,3 and outlet 0,56
The inlet side is the low side - this will have the larger hose. On a Thermal Expansion Valve system, this hose will run from the evaporator outlet to the compressor inlet. On a Fixed Orifice Tube system, this hose will run from the accumulator outlet to the compressor inlet. The outlet side is the high side, and the hose will run from the compressor outlet to the condenser inlet.
A tee is a plumbing fixture with one inlet and two outlets, or two inlets and one outlet. A cross is a fixture with one inlet and three outlets, or three inlets and one outlet.
Upper and lower radiator, inlet and outlet heater core, bypass,Upper and lower radiator, inlet and outlet heater core, bypass,
Generally a "pond" is taught of as a still body of water smaller than a lake. "still" implies no flow movement and would mean that there is no inlet or outlet. However, the term "pond" is sometimes extended as in "Mill Pond" which would have both an inlet and an outlet.
Inlet or outlet
valve guides are present in the engine cylinder head.these valve guide operates the working of valves in the cylinder.that is the inlet ant the outlet valves.
For efficiency's sake, the outlet had best be a lot cooler.
outlet ports are smaller to reduce the exhaust losses
Compressor outlet to metering device inlet.