The correct space is .030, find a piece of cardboard or thick paper and lightly glue it on, it will get knocked off when engine starts.
The crankshaft position sensor on a 2005 dodge caravan is mounted on the top side of the bell-housing.
The answer is yes.
The crankshaft position sensor on a 2005 dodge grand caravan is mounted on the upper side of the bell housing and can be easily accessed from the top.
The crankshaft position sensor on a 1998 3.0 dodge caravan is located on the top of the bellhousing towards the firewall.
odds are the the crankshaft or the camshaft position sensor
It would bolt in, but will not run. The tone rings for the camshaft and crankshaft position sensors are different.
on the top of the truck
trany bell housing
It is inside the engine, on the front of the crankshaft.
There is one on each end of the crankshaft. The front main seal is at the pulley and, while the rear main is at the transmission end.
Its situated in the sump of the engine It is on the nose of the crankshaft.
Crankshaft sensor is on the back of the bell hosing of the transmission and the camshaft sensor is behind of the motor mount on the left under the coil pack