they are not right shift
VERY CAREFULLY.
It is gear for the head
when facing the gear , you will see on the cyl head a big arrow , on the right hand side , it looks like a moulding bit , , but look hard and you will see it ,
on the head, there is a round access panel held with 3 screws, its on the same side as the gear shift.
1. Remove the plastic faceplate from the gear shift lever by prying up on the left or right side with a plastic removal tool or carefully with a flathead screw driver but only after opening the console door. 2. Turn the ignition to the start position and shift the gear to the drive indicator. This will allow the removal of the gear shift covering but only after removing the cigarette light switch. 3. Once the unit is removed, locate the two Phillips head screws located at the bottom and remove them. 4. Remove the plastic covering around the stereo using the same same procedures to remove from the console. 5. Six screws are position along the right and left side of the stereo that require removal. The gear shift still must be in the drive position to enable to removal of the unit. 6. Located on the rear are the connections that need to be removed to facilitate the removal of the stereo.
Another word for head gear is hat or you could say helmet .
All Sportsters made after 1975 have the shifter on the left side, unless someone has fitted parts from an older model.
The Shift solenoid a and b are together on top of transmission behind the right cylinder head. If you remove the vacume control unit, you can see it easly.
Headies Head Gear and Bass Pro are some of the shops located on Florida that sell head gear. Headies is located in Pensacola and bass pro is in Fort Lauderdale.
When. You have an under bite in order to bring your jaw to a normal pace u put on head gear
It is a tradition to show respect for the flag.
The firing order is counter clockwise: 13726548. The head on the right is 1234