There are four ways to find a ratio.
1 A dealer can normally tell from the vin number.
2 There are normally tags or labels on the axle that have part number, gear ratio, and fluid requirement
info.
3 You can count how many times you have to turn the driveshaft to get one complete turn of the tires.
4 You can divide the number of teeth on the ring gear and divide by number of teeth on the pinion.
A good majority of the 1984 Ford F150 gear ratio had 3.00 gears for the stock. In addition, the spline should be a 31.
will a gear shifter fork plate on 89 ford f150 work on 96 ford f150
Mine is 3:55
I am not positive about this but, I believe that this indicates that the axle has a 3.00:1 gear ratio. Check with you local Ford dealer for a definitive answer.
The axle ratio on a 2007 Ford Mustang GT is 3.55:1
what is the axle gear ratio for a 1998 ford ranger 4x4 4.0l?
Could be any of several. Check the little metal tag bolted to the diff. That truck also likely has a 8.8 rear, not a 9 inch. If the tag says "88" it's an 8.8. The gear ratio will be stamped with no punctuation, i.e. "327" would be a 3.27 gear.
In some 1982 Ford f100 trucks I know they have a 4.10 Gear ratio like my truck but with that gear ratio if you go over 55 mph you can say goodbye to your gas mileage so get a smaller gear ratio.
you can take vin to a ford dealer and they can tell you what ratio you have.or you can read in ownere manuel how to translate the vin. there is an explanation on which numbers mean what,and in the book is a list matching numbers to ratios
I believe " H9 " is a ( 3.55 limited slip , Ford Traction Lok )
Limited Slip Differential 3.55 gear ratio
they are gear to gear driven.