93%
Yes it can and the otherway aroud a DC motor can be used as a dynamo
1. AC Dynamo has full rings whereas DC Dynamo has split rings. 2. AC Dynamo produces alternating current whereas DC Dynamo produces direct current. 3. IN AC DYNAMO, CURRENT KEEPS CHANGING EVERY HALF OF A CYCLE WHEREAS IN DC DYNAMO, CURRENT FLOWS IN SAME DIRECTION.
DC generator
There are two types of electrical generator. One is a dynamo, which produces d.c. The other is an alternator, which produces a.c.
AC and DC Dynamo, galvanometers, etc...
Yes, by using a dynamo (which produces d.c.) instead of an alternator.
A "Dynamo" is a DC charger; these will overcharge any battery there is and requires a regulator circuit, they will produce voltage proportional to their rotation. Simply hook it to the battery (watch your positive and negative) and crank the generator / dynamo.
It makes AC ( alternating current ) . That's why it's called an alternator. A DC generator would usually be called a dynamo.
take two dc motors..................... connect the spindle of 1 motor to a hollow pipe so that the pipe should also rotate when the motor is given dc current (one can take an empty pen refill for that).... now fix the spindle of another motor to the other end of the hollow pipe...... the two terminals of the 2nd motor is now the terminals of the dynamo which will generate dc current........
To store energy produced from a dynamo, you can incorporate a battery into the system. The dynamo generates electricity, which can be used to charge the battery. An inverter can then be connected to the battery to convert the stored DC energy into AC power for use when needed.
California Love -Tupac Hells Bells -ACDC Back In Black -ACDC Raider Nation -Ice Cube Welcome to the Black Hole -Dynamo Oaktown
The question is mine......take one dynamo and a motor (both of them are DC).. If The Dynamo is 12v and the motor is 9v...and connect together.....means the rotating shaft of a motor is connecting using a belt then the other end connected to the rotating shaft of the dynamo ......connect the wire parallel......let start... take a cotton thread of 15 cm ...then round the thread on dynamo rotating shaft the pull it....the current from dynamo flows to motor that action make the motor rotates but not constant.....