Want this question answered?
Because you are at the highest magnification, only turn the fine adjustment knob when you are using the high-powered objective lens, and not the coarse adjustment. Otherwise you risk getting your sample out of focus, and you will probably only be able to refocusby starting with the lowest power objective lens.
850 is the highest beacon score possible.
4300x
So you don't damage the lens by crushing the slide into it.
Madara Uchiha's Eyes are the Eternal Mangekyou sharingan, the highest possible rank of the sharingan that will never go blind and that gives him longevity.
Objective - Ocular 40 x 10 = 4000x
Begin by using the lowest power objective lens and then switching to the next highest power lens.
First focus the microscope on the lowest objective using first the coarse djustment knob and then the fine adjustment knob. Once you have it in focus, move on and do the same for the next highest objective. Continue this process until you reach the highest objective and focus it in the same fashion.
It would depend on the microscope, however, there are usually 3 different powered objective lenses on a light microscope, the lowest being of 10x magnification, the middle being of 40/45x magnification, and the highest being of 100x magnification.
It provides the highest level of power to magnify the object in question, refer to the link below for more information:http://www.microscope-microscope.org/basic/microscope-parts.htm
The fine adjustment knob is used with the power objective on the microscope. Since the objective is already at the highest objective possible for that microscope, using the coarse adjustment knob would focus to much on the object making the details harder to read. Using the fine adjustment knob, you are able to see the fine details within the object or organism you are studying. The higher the power, the finer the knob and the lower the objective, the coarser the knob and objective.
the main objective of a hairdressers is to ensure that they give the highest quality cut possible to all of their customers.
the main objective of a hairdressers is to ensure that they give the highest quality cut possible to all of their customers
Several things do: 1) what magnification the ocular is (usually 10x) and the highest magnification of the objectives (usually 100x), giving you a total mag of 1000x 2) resolution, which in turn is affected by numerical aperture
On a microscope with the usual 3-lens turret it is usual to use the objective lens with the lowest magnification to first examine your specimen. This gives a wider overall view of the subject, and will allow you to choose the particular detail that best suits your study. You may then move on to a higher magnification, if necessary, to study finer detail. If you started with the highest magnification, your fine focus will be uncertain, and you risk the front of the objective lens coming into contact with the sample slide. This could damage your specimen, and may damage the front of the lens.
The highest magnification that can be obtained from a microscope depends on the objective (main lens) of the microscope and has no bearing on the magnification of the eye piece. A 10X eyepiece can only add to the magnification but cannot provide any further information.
The Compund light microscope allows people to view living cells. With the electron light microscope peole can only view dead cells but with very high detail. The electron microscope is also much more expensive than a compound ligh microscope. The compound light microscope is also much easier to transport from place to place, as the electron microscope is not.