The Stig Is Top Gears Racing Drivers Name !!!!
Spider gears are the side gears in a differential - the little gears that divide the input power between the two wheels.
Input gears are usually small and attached to a rotating shaft. The input gear is connected to an output gears via a belt, band, cable, drive chain, or directly with the output gear. The output gear transmits and magnifies the rotational power received for the input gear.
That depends on what kind of gears, wires, and functions are inside the box.
The transmission input shaft has gears on it that mesh with the different drive gears. It is spun by force from the engine, as you select different gears with the shifter, there are different sets of gears being meshed together inside transmission. The synchronizers ensure that the gears being meshed together are turning at the same speed, thus resulting in a smooth shift and no damage to the gears.
Automatic cars offer drivers much greater convenience as they no longer have to manually clutch in to shift gears. Most automatic cars available come with 4 gears, plus an additional reverse gear.
Transmit rotation, power, and change "input to output" ratio's.
Reflective gears are needed at night because they allow passing car's headlights to reflect off them and reveal your presence to drivers who might not have seen you otherwise.
The gears in the speedometer are stripped. If the odometer is working then you have input.
It can cause it to only have second and reverse gears.
Yes
Drivers. Drivers is like a middle-ground between software and hardware. It takes input from software and translates them into instructions the hardware can understand. Firmware is the software that the hardware is already programmed. Firmware is what allows hardware to "think" for itself.