0
What else can I help you with?
What is the job of a wire in a torch?
To conduct the flow of electrons/electricity from the battery to the bulb and back.
Will two batteries and a wire make a light bulb light?
first of all, you need a bulb, a wire, and ONE light bulb. You clip the wire on the battery and touch the wire on the bottom of the light bulb
Crown vic parking light fuse blows?
The wire is touching ground some where. It's a tough job, but you will have to follow the wire. Also, check the bulb socket first.
Does a bulb get brighter the shorter the wire?
The Shorter the wire the brighter the bulb ! Because if it is short then it get brighter and the more batterie the brighter the bulb ! Or the lower voltage the brighter the bulb !
How does a wire connect to a bulb?
A wire connects to a bulb by attaching one end of the wire to the metal base of the bulb and the other end to the metal contact on the bulb socket. When the circuit is complete, electricity flows through the wire and powers the bulb, causing it to light up.
Does the thickness or the length of the wire effect the brightness of the bulb?
The thickness of the wire (resistance) and length of the wire can affect the brightness of the bulb. Thicker wire has less resistance, allowing more current to flow and producing a brighter bulb. Shorter wire lengths also reduce resistance, resulting in a brighter bulb due to more current flowing through it.
How would a meter be connected in a circuit too measure the voltage at a light bulb?
When connecting a volt meter to a light bulb to measure the voltage of the light bulb, run a third wire from where the wire enters the bulb to one terminal of the voltmeter and a fourth wire from the other side of the bulb to the other terminal of the voltmeter.
What is a wire in a light bulb?
filament
What do support wire do on a light bulb?
As the name implies, support wires support the filament wire in the bulb, The filament, of course is the wire that glows white hot, giving out light
What is the wire in a light bulb?
The wire in a light bulb is typically made of tungsten. When an electric current passes through the wire, it heats up and emits light, creating illumination in the bulb. The tungsten wire has a high melting point, allowing it to withstand the heat generated during operation.
How do you use a light bulb as a resistor when charging a capacitor?
connect the light bulb to the positive wire like a inline fuse and then connect the wire to the battery it should just burn out the bulb
What is the wire that gives off light in a light bulb?
In an incandescent light bulb the wire that gives off the light is called the Filament.
