0
* Roughly $1.50 - $2.50 per sq ft LABOR only, varies do to workforce wages
* MATERIALS range from $0.40 - $0.50 per sq ft depending on geographic location, quantity ordered, fluctuating steel costs, and fasteners.
* $2.50 - $3.00 per square foot LABOR and MATERIALS.
* 40% - 50% Profit Margin, Before Taxes and Overhead.
* Calculations reflect 3 5/8" Steel Studs, 20 Gauge, &
16" Spacing for Common Non Bearing Walls.
* Example : Commercial Fit-Out : Interior Walls - 200' Lineal Feet - 10' foot High
* Materials : 50 Track Runners - 180 Studs - 220 Track Fasteners - 800 Screws
* Labor : 4 Man Experienced Crew - 10 Hours Construction and Clean Up
* 1 Foreman - $40 Hr Rate - Project Planning, Lay-Out, Set Elevations, & Details
* 1 Mechanic - $25 Hr Rate - Track-Out, Level & Plum Walls, & Rough Openings
* 2 Helpers - $15 Hr Rate - Stud-Out, Cut Materials, Square Studs & Screw-Off
* Contract : 2,000 Square Feet Commercial Framing @ $2.50 per sq ft = $5,000
* Labor : $40 + $25 + $15 + $15 = $95 Dollars x 10 Hours = $950
* Materials : Track = $200 + Studs = $600 + Fasteners & Screws = $150= $950
* Total Earnings = $5000 - Total Costs = $1,900 = $3,100 Gross
* 62% Profit Margin - Excluding Taxes, Insurance, & Overhead
* $3,100 Gross Earning - 28% Income Tax = $868 = $2,232 Net
* $2,232 Net Earning = 46% Return = $2,232 Total Profit
Wiki User
∙ 11y ago
Add your answer:
Earn +20 pts
What framing member touches the trimmer stud and the header?
kING STUD
What is a Jack stud?
A post in which it holds the jacks against / within the wall framing
What is the price difference in metal stud framing versus wood framing in Washington state and also Texas?
The price difference of metal framing versus wood framing in Washington state and Texas will vary depending on the exact material that is being used. Typically though metal framing is cheaper then wood framing however the labor costs are higher.
What do you call a horse used for breeding?
A male horse kept for breeding is called a stud.
Commercial Metal stud framing price per sq foot?
Depends on your area (region) You can estimate about $2.73 sf
What is the weight of a steel stud?
It depends on the gauge of the steel used in the stud and the width of the stud. For example, a 2-1/2" 18 Ga. Steel Stud made from Galvanized Steel could be figured simply from the properties of the steel. The stud is 2-1/2" wide with a 1-1/4" flange and a 1/4" return (on each side). This adds up to 5-1/2" of steel. Galvanized steel weighs 2.156 lbs/sq ft. Now it's just math. 5-1/2" = 0.45833 ft. 2.156 lbs/sq ft * 0.45833 ft = 0.9882 lbs/ft. So, a 2-1/2" 18 Ga. Galvanized Steel Stud weighs approximately 1 lb/ft.
What is the cost of breeding a throughbred?
Stud fees
What is the weight of a NELSON STUD?
It is measured the same way as the weight of reinforcing steel.
Why do they leave the corner steel stud unscrew before the dry wall?
If you are reffering to an inside corner stud at an intersecting wall , it is so the drywall on the wall being intersected can run continuesly behind that stud.
How much on average would white gold stud earrings cost?
On average, white gold stud earrings cost around $100-$300. You can purchase white gold stud earrings online from stores such as Target or retailers such as Amazon.
How much do pearl stud earrings cost?
The cost of pearl stud earrings can vary from store to store. The prices range from $24 to $69 depending on the store and what sales they are running.
How much does a pure bred stud horse cost?
The price for stud horses can very depending on breed, lineage, the horse's conformation and many other factors. A pure-bred stud horse can cost anywhere from $5000 up and over $100,000.
