Want this question answered?
You will need a phase converter. Avaliable at an industrial supply company like granger supply
With no three phase power supply you can't use a three phase motor of any kind at all!
If you are asking whether it is possible to upgrade from single phase to two phase, then you should understand that a two phase system is archaic and will not be available from your electricity supply company. If you are asking whether your company can supply two lines (out of three) it's quite unlikely -they will normally supply single phase or three phase! You can likely upgrade to three-phase if you have a reason to do so -e.g. to operate three-phase motors. As for the cost -you'll have to check that our yourself!
Terminology gets misapplied but a 3-phase converter produces a 3 phase supply from a single phase supply. The only proviso is that generator, converter and motor are all suitably rated and compatible.
In a two-phase connection, the phases are displaced by 90 degrees. Two lines (not 'phases') of a three-phase system will provide a single-phase supply, not a two-phase supply.
Bcoz in single phase if supply is interrupt or any trouble there is no power .but in 3 phase if 1phase supply gone we can manage it by other 2 phases
asset identification
If you want a five-phase supply you need to start with a three-phase supply and a transformer that has 15 symmetrical cores. But why would one need a five-phase supply . . three is enough.
You don't. A three phase motor will not start unless it is connected to a three phase supply.
No.
You will need a phase converter. Avaliable at an industrial supply company like granger supply
No.
How much current equipments are drawing from three phases (combined or individual) is called three phase load and how much supply we are getting from source is called three phase supply. Ex. In INDIA single phase supply is 220 volt ac with neutral. So in three phase supply all RYB phases should be 220 volts ac with neutral individually. If we calculate with phase to phase than it shoulb be 415 volts ac.
With no three phase power supply you can't use a three phase motor of any kind at all!
The standard nominal voltage in Canada for a single-phase residential supply is 240/120-V split-phase supply.
No. That would be a single phase motor.
A single-phase supply is obtained between any two line conductors or between a line and neutral conductor of a three-phase supply. To obtain a three-phase supply from a single-phase source is far more difficult, and requires additional equipment.