answersLogoWhite

0


Best Answer

You need to go to a parts house and buy the bolts. They are special in the fact that the shoulders are made to keep the starter straight.

User Avatar

Wiki User

15y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: What is the length of the long bolt that mounts the starter for a 1985 Caprice Classic?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

How many motor mounts does a caprice classic have?

The correct answer is twoBUTThere is a rear transmission mount as well to support the engine and transmission assembly properly.


When changing the engine on a 43 Liter 1988 caprice classic to a 350 how do you mount the 350?

they are both V8s, they should use the same motor mounts


Can and 83 Camaro 350 fit in your 87 caprice classic?

if your caprice has a 305 or 350 already there shouldn't be a problem. otherwise new or custom motor mounts will be needed, also a tranny to match up to the 350 from the camaro


How do you change the spark plug wires on a 1994 caprice classic EFI 5.7 350?

It will require putting the car on a lift so that you can get the wires through the engine mounts.


Can you put a lt1 motor in a 1989 caprice?

Yes, but the engines mounts are different and wiring. But it will work.


How do you change back shocks on a 1995 cheve caprice?

A person can change the back shocks on a 1995 Chevy Caprice by unmounting them from the upper lower mounts. The shocks can then be removed from the vehicle and new shocks put in their place.


CAN you PUT a 455 in your caprice?

yes you can you may have to change motor mounts a get electric fan for more room but there is alot of room under the hood


What is tire size for a 1994 Chevy Caprice?

Depends on what size the wheel is ... the round thing that the tire mounts onto! 225 75R 15


How to change the oil pan gasket on a 1985 Chevy Caprice?

Drain the Caprice oil. Unbolt the pan and lower. If needed, raise the engine by using a jack and unbolting the engine mounts. Take out the pan and clean the old gasket from the pan and engine block. Reinstall the pan with a new gasket. Reconnect the motor mounts if needed then fill the engine with oil.


How do you remove the starter from a 1998 Isuzu Rodeo?

You might have to take the motor mounts bolt and disconnect the exhaust after the Y and at the monifolds and lift the motor slightly to get the starter out.


Will a Chevy 454 big block fit in a 88 Chevy caprice?

yes, there is plenty of room for it, you will just have to change motor mounts if your car is a V6.


How to remove 1999 Corolla transmission?

Disconnect all electrical connections. Unbolt from engine, starter and mounts.