0
How do you change the spark plug wires on a 1994 caprice classic EFI 5.7 350?
Wiki User
∙ 15y ago
It will require putting the car on a lift so that you can get the wires through the engine mounts.
Wiki User
∙ 15y ago
Add your answer:
Earn +20 pts
How do you change spark plug wires for a 94 caprice?
The spark plug wires on your 1994 Chevrolet Caprice are quite easy to change. The spark plug wires simply lift off on each end. Put the new spark plug wires on and push until you feel a click.
Where do the spark plugs go from the cap to the plugs on a 92 caprice classic with a 350?
Ummmm......... I think you want to use spark plug wires.
How to tune up on a 1995 caprice classic?
Change spark plugs and wires, change all fluids, check o2 sensors, distributor and rotor cap possibly, change all filters...and a fat wallet...
Why does your 1995 Chevrolet caprice misfire after you changed the spark plugs and wires?
you either did not gap the plugs to spec or you put this wires on wrong
What is the order of the spark plug wires on the distributor for a 1996 Chevy caprice?
To add, this is a 5.7 v8 engine.
How do you change ignition wires?
Are you referring to spark plug wires
Why does your 1995 Mazda 626 idle rough and hesitate on acceleration?
Change the spark plugs and wires... Change the spark plugs and wires...
In what order should the spark plug wires from distributor cap to the motor be in a Chevrolet caprice classic 1991?
(This is from the 91 Caprice service manual for the HEI ignition system) Looking at the distributor cap from the front of the engine bay, and running clockwise around the cap from about the 1 o'clock position, the wire numbering is: 3,6,5,7,2,1,8,4
Do you have to change your spark plug wires when you change your spark plugs?
No. However, newer plug wires can be extremely difficult to remove without damaging them.
Changed rotor cap plugs wires coil on 1990 caprice still no spark what could be the problem?
try the moduel
How do you change the spark plug wires on an impala ss?
Disconnect the battery, remove the spark plugs wires and boots and remove the spark plugs. Put in the spark plugs, replace the spark plug wires and boots, and connect the battery.
Do you need to change your spark plug wires if you changed your distributor?
Yes, if the spark plug wires can be connected to the distributor and works.
