I've been looking for a while... the lightest I've seen advertised is: Powerhouse 60370 500Wi Inverter Generator at 21.38 pounds. 500 watts isn't much power, but at just over 21 lbs... it's a good deal.
Depending on the type of generator, you can measure the voltage at the output. Assuming it's a regular 120 volt AC generator, the output should measure 120V AC. If it doesn't, you may have problems.
The formula you are looking for is W = I x E. I = W/E. A = W/V.
If you want your bulbs to last longer then use 130 volt bulb on a 120 volt system. The light emitted by a 130 volt bulb, when comparing it to a 120 volt bulb, will be a bit dimmer.
You will need a 50 kW generator for a single phase 120/240 volt service.
No, not a good idea. You have to use a 347 volt ballast.
Depending on the type of generator, you can measure the voltage at the output. Assuming it's a regular 120 volt AC generator, the output should measure 120V AC. If it doesn't, you may have problems.
Can you use a 120 volt bulb in a 130 volt socket?
The formula you are looking for is W = I x E. I = W/E. A = W/V.
No, the generator must output 220 volts which any generator I have ever seen does.
If your generator is rated at 1000 watts continuous......and you are using 120V.....available amps are 1000/120 =8.3 .
You tell yourself the 125 volt receptacle is a 120 volt receptacle. They're the same thing.
If you want your bulbs to last longer then use 130 volt bulb on a 120 volt system. The light emitted by a 130 volt bulb, when comparing it to a 120 volt bulb, will be a bit dimmer.
You will need a 50 kW generator for a single phase 120/240 volt service.
Use a volt meter Plug a 120 volt accessory into it
Yes. But not the other way. 120 volt one, cannot withstand 220volt.
No totally different
Yes, the voltage listed on the bulb is the nominal voltage and it will work perfectly on a 120 volt circuit.