I've been looking for a while... the lightest I've seen advertised is: Powerhouse 60370 500Wi Inverter Generator at 21.38 pounds. 500 watts isn't much power, but at just over 21 lbs... it's a good deal.
The formula you are looking for is W = I x E. I = W/E. A = W/V.
You will need a 50 kW generator for a single phase 120/240 volt service.
Choose a bulb with the same voltage as your fixture to prevent damage or risk of overheating. If the fixture specifies 120 volts, use a 120-volt bulb. If in doubt, consult the manufacturer's instructions or a professional electrician.
no
No, it is not possible to use 240 volts with a 120 volt supply directly. You would need a transformer to step up the voltage from 120 volts to 240 volts. Attempting to use 240 volts with a 120 volt supply without a transformer can damage equipment and pose a safety hazard.
The formula you are looking for is W = I x E. I = W/E. A = W/V.
No, the generator must output 220 volts which any generator I have ever seen does.
You tell yourself the 125 volt receptacle is a 120 volt receptacle. They're the same thing.
If your generator is rated at 1000 watts continuous......and you are using 120V.....available amps are 1000/120 =8.3 .
To convert a 240 volt power source to a 120 volt power source using a 240 volt to 120 volt adapter, simply plug the adapter into the 240 volt outlet and then plug your 120 volt device into the adapter. The adapter will step down the voltage from 240 volts to 120 volts, allowing you to safely power your device. Make sure the adapter is rated for the appropriate wattage to avoid damaging your device.
Use a volt meter Plug a 120 volt accessory into it
You will need a 50 kW generator for a single phase 120/240 volt service.
Yes. But not the other way. 120 volt one, cannot withstand 220volt.
No totally different
Choose a bulb with the same voltage as your fixture to prevent damage or risk of overheating. If the fixture specifies 120 volts, use a 120-volt bulb. If in doubt, consult the manufacturer's instructions or a professional electrician.
Yes, the voltage listed on the bulb is the nominal voltage and it will work perfectly on a 120 volt circuit.
Yes.