Not all 1500's where built with it. If it is there it will be above the parking brake.
To connect the Wii Nunchuk controller to the Wii, first put the cord through the connector hook on the Wii Remote wrist strap and then the locate external extension connector on the base of the Wii Remote to insert the Nunchuk plug.
The Previous answer was incorrect. The gamestop ps3 controller should have come with a usb reciever for the wireless controller to connect to our ps3. When you plug it in it will start flashing a red light. just hit the "HOME" button on your controller and it will connect to the PS3 via that wireless usb connector.
To connect any controller to a PS3 first plug in a USB cable to the controller. Connect this cable to the PS3 you want to connect the controller to. Press the PS button and the controller will connect.
The connecting outlet is located under the left side of the dash above the emergency brake. You are looking for a plug in outlet that is color coded blue. The connecting pigtail that you can get from any Dodge dealer will also be blue on the end that you are going to plug in. Connect them together and then you are ready to connect the other end to your electric brake controller.
You need the connector chip; it is almost like a memory car that takes place of where you would plug in the cord if there was one for the controller. It should be in the package.
Plug the USB connector into the USB Port... then control the menu with the normal Controller
Yes, get an rj45 phone connector and an old Gamecube connector. Connect the blue wire of the Gamecube to the blue of the controller. This is the data wire. Now connect the red and black wires in reverse to the lodgenet controller. This is why they say its not compatible with any home game system because they reversed the polarity. The other wires don't need connection. Enjoy your new super long gamecube controller.
To do this, you need a power adapter (a computer power supply will work great for this). The Drive will have a molex connector on the back for +12 VDC, ground, ground, +5 VDC. Connect a molex connector to that drive with the proper voltages, and the drive should power on. However, it won't be much good without connecting it to a computer motherboard, or drive controller.
A Socket Connector is where you are going to connect a socket
Refer to your service and user manual to connect your controller to your XBOX 360.