abrasive grit, probably used in sandpaper
320 grit
24 grit
Answer: I would start with a 400 grit sandpaper then a 1500 grit sandpaper then I would use a paste car wax to get a nice shine.
Grit refers to the fineness of the sandpaper. Depending on the application for which you wish to use the sandpaper, choose the correct grit size. Example, general finish for timber flooring or fine finish for coffee tables etc.
I would use a fine grit like 220 or so.
The higher the number code printed on the back of all sandpaper the finer the grit. With a little practice you can begin to understand what grit is appropriate for any given job. For instance, I refinish hardwood floors and it requires three courses of sanding. To help quickly remove an old finish from hardwood floors I start with a very course #20 sandpaper. It is so rough that it removes a large amount of material pretty quickly. Then, when I have sanded the floor down to bare wood I "step up" to 60 grit sandpaper. Once I've gone over the entire floor with the 60 grit I "step up" again to the finer 100 grit paper. When refinishing wood floors or furniture it is necessary to use several courses of sanding to help remove the deep scratches created by the rougher grits of sandpaper. I hope this helps. John
Go to the website stewmac.com. They sell guitar finishing supplies and they stock 4000 grit paper.
By the amount and size of grit on the paper. The smaller the number, the less the grit of larger size. the bigger the number, the more the grit of smaller size. 60 grit would be for removing a lot of material, 320 grit would be for finer sanding.
You can reduce the weight of a cricket bat by using sandpaper. You can use 100 or 80 grit sandpaper to sand the bat down.
To remove scratches u must use fine grit sand paper starting with 220 grit and progressing to super fine 600 grit sandpaper
It holds the grit on the paper before the adhesive can set.