answersLogoWhite

0


Best Answer

To remove scratches u must use fine grit sand paper starting with 220 grit and progressing to super fine 600 grit sandpaper

User Avatar

Wiki User

12y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How do you remove scratches from a plastic dishwasher panel?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Continue Learning about Chemistry

What the formed the water by the sudden push of the plastic panel?

Pushing the plastic panel puts a force (energy) into the volume of water on the other side of the panel. As there is always cause and effect, the compression felt by the water is transmitted into a force that must have an effect. The effect is movement as the wave so formed, radiates outwards until the force is spent.


What color tube is drawn for a basic metabolic panel?

It's a clear plastic bottle for urine and a clear tube for blood.


How do you install side mirror on cobalt?

The manual mirrors are quite easy. On the inside of the passenger door, there is a black plastic covering where the mirror adjuster is. it pops off with a little wiggling. there are three bolts with nuts on them, (if you look at your replacement mirror it makes sense) 1 bolt is exposed (10MM socket) and 2 are kind of under the door panel. Just pull the door panel out a little and you can access the bolts. (need a 10mm socket wrench for one of them). Once you remove the nuts the mirror pulls away. but you still have to remove the black adjusting mechanism. if you line it up correctly with the slots, and squeeze the sides it comes out with a little patience. good luck.


How do you change the head unit 2006 cobalt?

with a screwdriver DELCO Actually, there are no screws: just 4 7mm head bolts in head unit itself. To get there is a bit of a journey. Eveything is held in place using clips. They are stiff, but no problem if you're carefull. 1st, remove the panel under the steering wheel. This makes it easy to remove the little trim panel with the "i" buttons to the left of the wheel. This has 2 clips, so it's a bit of a fight. Be sure to pull it out as straight as possible to avoid damaging the clip mounts. Then remove the trim panel over the glove box door the same way. There are about 5 clips on the back of it. Then remove the trim aroung the radio. It has 6 clips, 3 along each side at the top, middle and bottom. Remove the head unit bolts and pull it forward.


How to uninstall Adobe Photoshop CS2?

An uninstaller should have been installed with the program. Use it (it might be in the same location as the executabel itself)Or if you are running on a Windows operating system go to Start>Control Panel>Add and remove programs; search fro Adobe Photoshop CS2 and click Remove.1 Close any Adobe applications you have running.2 Click on the "Start" menu and select "Control Panel." In the dialog box that opens, click "Add or Remove Programs."3 Find one of the Adobe CS2 applications in the programs you see listed. Highlight it and click "Remove." When the dialog asks if you are sure you want to remove the program, click "Yes." Do this for each Adobe CS2 application you find listed.

Related questions

How do you remove the instrument panel on a 2003 4Runner to clean the plastic covering on the gauges?

There's a product made by Maguire's called Plastix that will remove any scratches on the instrument panel lenses. I use it on my 03 Limited 4runner, including the headlight and tailight lenses. Cheers,


How do you remove a door panel on 2006 Ford Fusion?

1st - Remove screw from inside the armrest (and remove entire molded plastic console. Cables for mirror and windows can be unclipped)2nd - Remove plastic cap from inside door handle and remove screw (Again, remove molded plastic cable for door locks can be unclipped)3rd - Remove 3 screws on the perimeter of the door4rth - Either pull the plastic panel off or get the tool so as not to damage the door panel


How on a 2000 Ford Focus do you remove the plastic panel over the AC switches?

to remove the plastic panel over the a/c switches you need to first remove the radio then you need a socket to remove the a/c swiches because they are part of the panel there are 4 bolts one in each corner of the space left after you remove the radio.


How do you remove kick panel of 1996 Toyota Corolla?

first you need to remove the door sill plastic panels, just lift them right up and then pull the kick panel plastic back towards the B pillar that should remove them


How do you remove Bosch dishwasher benchtop panel model SGS4002AU?

At the top rear left and right sides of the machine are white plastic notched clips. Push each clip up with a flat screwdriver whilst sliding the top backwards. The top will disengage and can be easily lifted off.


How do you change dash lights in 2001 intrepid?

remove plastic around instrument panel . remove screws from instrument panel then pull panel towards you to unplug it this will allow to get to dach lights


How do you remove the stereo from a 2002 Ford Explorer limited?

remove the plastic panel around the stereo by using a flat screwdriver to pop it out in all corners then remove screws then remove stereo remove the plastic panel around the stereo by using a flat screwdriver to pop it out in all corners then remove screws then remove stereo


Where is the circuit opening relay on a 1997 Toyota Tacoma?

remove the bolts holding on the plastic paneling under the steering wheel in the interior. remove the two bolts connecting the hood release latch from this plastic panel. then remove the panel. the circuit opening relay is under this panel, and is green(in my 1997 tacoma).


Where is the bulb for the clock in a Acura tl 2003?

you have to pull the radio. once you do that remove the plastic panel. Then you will have to unscrew the clock from the plastic panel. There is a white piece on the back which is the bulb.


How do you remove the rear speakers on a 2000 Mustang convertible?

this probably isn't very helpful, but 1.remove the rear seat 2.there will be black clips that hold on the plastic panel (speaker is located behind the panel) remove the clips then the panel 3.unscrew the speaker and clip the wires this probably isn't very helpful, but 1.remove the rear seat 2.there will be black clips that hold on the plastic panel (speaker is located behind the panel) remove the clips then the panel 3.unscrew the speaker and clip the wires


How do you remove an interior door panel on a 2007 sebring?

Remove the 1 screw behing door handle and the 2 on the armrest. Then pull outward on the bottom of the door panel. There are 8 to 10 plastic retainers holding the plastic to the metal.


How do you remove the sliding door panel on Dodge Grand Caravan?

To remove the sliding door panel on a Dodge Grand Caravan begin by removing the top plastic panel. Then remove the bottom piece after unscrewing a few screws located on the bottom half of the vans door panel.