"One after the other," as opposed to a parallel circuit, or "side by side."
Main circuit circuit breaker
if the one bulb is not lighted the all is no lighted
The series circuit has one wire, while the parallel circuit has two wires. And if you connect the extra wire its dim because your taking away electrons and energy flowing through the main circuit -Hope this helped:D The difference is that series circuit has one path but parallel has more than one path. -hope this helped!:D ~Bunnii Boo
A flashlight typically uses a series circuit. In a series circuit, the electrical components are connected in a single path, meaning that the current flows through each component in the circuit. This setup allows for the proper functioning of the flashlight by providing power to the bulb from the batteries.
open 2nd answer: The meaning of circuit means ' a closed loop', whether it is an electric circuit, a circuit of a race, or the circuit of a traveling judge. So, by definition, the Series Circuit is closed.
A series circuit is wired in one direct pathway, meaning the components are connected end-to-end like a chain. In a series circuit, the same current flows through each component, so if one component fails, the entire circuit will be disrupted.
There are four types of circuit: series, parallel, series-parallel, and complex.
A series circuit is actually in series, but a parallel circuit, is Parallel
series circuit
parallel circuit / series circuit / and a short circuit
In a series circuit, there is only one path for the current to flow. The current flows through each component in sequence, meaning that if one component fails or is removed, the entire circuit is interrupted.
A blowout coil connected in series with contactor's auxiliary contacts that shunt around the main contactor contacts. The coil is out of the circuit when the main contactor contacts are closed and in the circuit when the main contactor contacts are open.