open
2nd answer:
The meaning of circuit means ' a closed loop', whether it is an electric circuit, a circuit of a race, or the circuit of a traveling judge.
So, by definition, the Series Circuit is closed.
If one bulb in a series circuit goes out, then current can't flow anywherein the circuit. A circuit in which current can't flow is an open circuit.
Both open and closed circuits involve the flow of electric current. In an open circuit, the current is interrupted or stopped due to a gap in the circuit, while in a closed circuit, the current flows continuously through a complete loop of conductor.
Switches control the flow of electric current in a circuit. In an open circuit, the switch is off, interrupting the flow of current. When the switch is closed in a closed circuit, it allows the current to flow continuously through the circuit.
In a closed circuit, energy can pass through the circuit because it forms a complete loop allowing the flow of electricity. In an open circuit, energy cannot pass through as the circuit is incomplete and does not allow the flow of electricity.
when a circuit is closed, electricity can move though it.
If one bulb in a series circuit goes out, then current can't flow anywherein the circuit. A circuit in which current can't flow is an open circuit.
In order to illuminate the light, you need a closed circuit. It would be normally open, and closed to indicate that the door is open.
A circuit is considered open if there is a gap in the path for electricity to flow, causing the current to stop. A circuit is closed when there is a complete, unbroken path for the electrical current to travel through.
Which would be better in lighting a house a closed or an open circuit ?\
A closed series circuit is one where the current flows through all devices in the circuit. Opening a switch prevents current from flowing in the circuit and it becomes simply an "open circuit". Any device that operates with current (light, LED, motor, etc) will no longer function.
There is a complete path for the electricity to flow. The opposite of an open circuit. If a light switch is on and the light comes on, the circuit is closed. If the switch is turned off, the light goes off because the circuit is open.
open and closed circuits
Not similar at all. They are opposites.
Both open and closed circuits involve the flow of electric current. In an open circuit, the current is interrupted or stopped due to a gap in the circuit, while in a closed circuit, the current flows continuously through a complete loop of conductor.
In a series circuit, if you open a bulb, current loop will be broken. So, current cannot travel all the wayback, hence no output. But in a parallel circuit, current will be only shared with parallel circuit, but the loop remains closed even if you remove the bulb. So, no change occurs.
No, a wire wrapped around a magnet is an example of a closed circuit, as the wire forms a continuous loop for the flow of electric current. An open circuit is a circuit that is interrupted, preventing the flow of current.
which electric element should be used so as to open the closed electric circuit