When an electrical charge is placed on the drum repels the toner particles that have the same charge. The laser then discharges the drum in specific places, causing toner to stick just to the discharged places on the drum.
The toner is then transferred to the paper and the paper is heated to fuse the toner to the paper.
laser printer corona wire
It's a component in a laser printer that Fuses the toner to the paper.
The purpose of the fuser in a laser printer is quite necessary. It is the part of the printer that heats up and makes the entire printing process possible. Without it, a laser printer would not work.
An imaging drum is present in laser printers. The imaging drum receives the image sent by the laser in the printer. The drum holds the electrostatic charge to transfer the toner ink to paper.
Depend on type of Printer. A laser, LED or electrostatic printer, YES. Dot matrix or Thermal Printer, No.
Clean the corona wire and wipe the drum with a soft cloth.
The static-charge eliminator strip or roller.
Photo Sensitive Drum, cleaning blade, and primary corona wire
To remove the positive charge from the printing roll, allowing the ink to stick there and from there transfer onto the paper.
The HP Laser Printer is a printer produced by HP. It uses laser technology to work more efficiently than the previous prototypes. Because of this new technology, the printer is best used to mass-produce papers. There are also subdivisions of the HP Laser Printers, which are: HP Laser Jet 4000, HP Laser Jet 4050, and HP Laser Jet 4250.
the laser printer was invented in 1969 dumbasses
If you have an HP laser printer, I suggest you buy it directly from HP online store. I find it cheaper to get laser printer cartridges from them for my HP laser printer. If you have a different brand of laser printer, amazon is a good place to start if you're looking for a cheaper laser printer cartridge.