0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
What is the dimension difference between ANSI 300 Flange and PN16 Flange?
PN 20 is equal to ANSI 150 & ANSI 300 equals PN 50.
What are the pressure rating for 150 ansi flanges?
20
Is the flange standard and dimension ansi b16.5 for valve different from pipe flanges standard for size over 24 inch or are the same and is different why and what are those standards?
Over 24" the spec changes to B16.47. For a complete listing of dimensions on the flange side of B16.5 and B16.47 check out www.texasflange.com
What is the purpose of ANSI?
ANSI stands for "American National Standars Institute"
Using ANSI in C language?
The latest ANSI standard is C99. See the attached link.
What is ansi 150?
Ansi 150 is a pressure grade of flange ie. Ansi #150 Flange. For steel flanges this is specified by ANSI B16.5.
What is the dimension difference between ANSI 300 Flange and PN16 Flange?
PN 20 is equal to ANSI 150 & ANSI 300 equals PN 50.
Is pn16 flange rating is equal to ansi 300 flange rating?
It's #150.
Why is it called ansi 150 ansi 300 etc?
The number (e.g. 150) is the lb force the flange is rated to.
What is difference between ANSI b 16.5 class 150 and ANSI b 16.5 class 1500?
The Class ranges of ANSI Standards refers to the pressure and temperature limits of usage for the Product. The class ranges from 150 and goes upto 2500. They denote the different pressure ranges. For example, A 316 Stainless Steel valve in class 150 can be used only upto 275psi Same 316 Stainless Steel valve in class 1500 can be used only upto 3600psi Does that clears your doubt?
What is a flange rating?
*Any flange having different MOC bears the rating with respect to international standards like ANSI B16.5.*It is a designed pressure that a flange can withstand.*For example a flange is having the following specification:25NBX150#,FORGED CARBON STEEL as per ANSI B16.5is having 150 psi flange rating.It can withstand 150 psig pressure safely.(Noting that in most cases the pressure-temperature charts of a given spec will allow for normal operating pressure to far exceed the class rating at ambient temperature. For example a 150# flange in A105 Carbon Steel will rate for 285PSI at -20 to 100 Degree F. For more information see www.texasflange.com The original intent was to class the parts to safely hold the given pressure at relatively high temperature. Since often times the operating temperatures are much lower the flanges can usually be used well above their given rate. When in doubt take your design criteria to a company that deals in it and ask for the specifics.)*Pipe flanges that are made to standards called out by ASME/ANSI B16.5 or ASME/ANSI B16.47 are typically made from forged materials and have machined surfaces. They are typically in "Pressure Classes" such as 150#, 300#, 600#, 900# 1500#; however, ASME B16.47 still recognizes the 75# or "Class 75" flange for certain low pressure and low temperature applications. These "Pressure Classes" have both pressure and temperature ratings for specific materials. The flange faces are made to standardized dimensions and are typically "flat face" "raised face" "tongue and grove" or "ring joint" styles, although other obscure styles may be permitted. Flange designs are available as "welding neck" "slip-on" "lap joint" "socket weld" "threaded" and also "blind flange". The gasket type and bolt type are generally specified by the standard(s); however, sometimes the standards refer to the ASME Boiler and Pressure Vessel Code (B&PVC) for details ( see ASME Code Section VIII Division 1 - Appendix 2 ). These flanges are recognized by ASME Pipe Codes such as ASME B31.1 Power Piping, and ASME B31.3 Process Piping. Materials for flanges are usually under ASME designation: SA-105 , SA-266 or SA-182.*Please visit following link and download the software, you will get both pressure v/s temperature rating of flange:
Is pn 16 the same as ansi class 125?
No. The answer is same as class 150
A pipe of ansi pressure rating NP40 is equivalent to what pipe in jis standards?
np40 is equivelant to ansi 300#
What are the pressure rating for 150 ansi flanges?
20
What is difference between weld neck flange and slip on weld flange?
http://www.tubecraftflange.com/products/slipon.htmTubeSlip-On Flanges are probably the most common type of flanges in the industry and are ideal for lower pressure applications. You do not have to specify the pipe schedule when using slip-on flanges due to the fact that its inside diameter is determined by the outside diameter of the pipe. This outside diameter of the pipe does not change for the different schedules. This often makes these easier to stock for vendors. Fabricators also like the fact that these flanges are slightly easier to align than weld neck flanges. They also are slightly easier to cut pipe to the proper length for. They can be used for high temperature and pressure applications but are not generally recommended as compared to other types of flanges. ASME B16.5 Code limits their usage in the 1500#-2500# (lbs.) weight classes.
Is the flange standard and dimension ansi b16.5 for valve different from pipe flanges standard for size over 24 inch or are the same and is different why and what are those standards?
Over 24" the spec changes to B16.47. For a complete listing of dimensions on the flange side of B16.5 and B16.47 check out www.texasflange.com
Where can you buy an industrial flange to ANSI and ASME specifications in stainless steel?
Jaydeep Steels needs no introduction in the field of Stainless Steel Flanges fabricating. Not only do we manufacture a variety of SS Flanges, but we also stock, supply, and export variety of finest range of flanges which are used for numerous industrial purposes.
