2
You can have a maximum of 8 plasmid slots.
It depends on how much your operating system and computer system board can support (although if your computer can support more, it's not necessary to load the maximum amount unless if it's lesser than 8GB). To install it, align the notches where the copper contacts are on the bottom to the socket you will be installing it in. Then carefully lower the modules into the slots, and press on BOTH sides of the modules until the latches on both sides click and lock into place.
This depends on the number of RAM slots in your computer itself, which varies from model to model.
You need to look at the motherboard and see if there are any spare memory slots. You also need to check the maximum amount of memory that the motherboard can handle.
2 DDR slots with a maximum capacity of 512mb in each.
The MSI MS-7082 supports a maximum of 2 GB of RAM, using DDR400 modules in 2 slots (1 GB per slot).
2.0 GB It has two slots Each can Hold 1.0 GB of RAM type DDR266 PC2100, 184p DIMM
You can have up to 20 pets in the stables and as you level up, you gain more active pet slots (up to 5) that you can call at any time. The 20 in the stable can only be called if they are moved to one of your active slots.
You can find out how much RAM (memory) is on your computer by checking the System Information dialog box to see the installed physical memory, or you can go to Control Panel. The amount of RAM you need depends on the operating system you are using. You also should consult your owners manual which will show you the number of slots on how much RAM it will accept.
lane
type of chipset
Unless the motherboard was specifically designed to support a riser card, you cannot add additional expansion slots to it.