0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
What is the maximum stair rise and minimum tread for industrial stairs?
Normally 7" rise and 11" run.
What is 632 Tread Depth?
6/32 inch. it is a measurement of tread depth.
The stair tread depth is typicaly how many inches more than the run so that it sticks out?
The 'nosing' of a tread is typically 25-30mm(1-1 1/4").This measurement is taken from the face of the riser. The 2006 International Residential Code (IRC) states the information about stairs below. You should check with your local building department to verify applicability. R311.5.3 Stair treads and risers. R311.5.3.1 Riser height. The maximum riser height shall be 7¾ inches (196 mm). The riser shall be measured vertically between leading edges of the adjacent treads. The greatest riser height within any flight of stairs shall not exceed the smallest by more than 3/8 inch (9.5 mm). R311.5.3.2 Tread depth. The minimum tread depth shall be 10 inches (254 mm). The tread depth shall be measured horizontally between the vertical planes of the foremost projection of adjacent treads and at a right angle to the tread's leading edge. The greatest tread depth within any flight of stairs shall not exceed the smallest by more than 3/8 inch (9.5 mm). Winder treads shall have a minimum tread depth of 10 inches (254 mm) measured as above at a point 12 inches (305 mm) from the side where the treads are narrower. Winder treads shall have a minimum tread depth of 6 inches (152 mm) at any point. Within any flight of stairs, the largest winder tread depth at the 12 inch (305 mm) walk line shall not exceed the smallest by more than 3/8 inch (9.5 mm). Hope this helps! TL North, CBO
What is the depth of tread on a tire?
It is the depth of the grooves in the tyre.
What is the minimum legal tread depth for a road tire in the UK?
The minimum tyre tread depth in the UK is 1.6mm.
What is the tread area of wood stairs?
The tread area of stairs is the part you step on, the whole width of it. It is not the instep, ie the upper part of the stair or step.
What is the safest tread depth of a tire?
That depth present on a new tyre.
What is the minimum tread depth for tires other than the front tires?
Minimum tread depth for all 4 tires is 2/32"
What is a tire bar?
It is the rubber marker within the tread to show tread depth. It is also known as a tread wear indicator
What is the legal minimum tire tread thickness in UK?
If you mean tire tread depth, the minimum is 1.6mm.
Are there any laws in Illinois that govern tire tread depth?
Illinois, along with 41 other states require 2/32" tread 2 States require 1/32" 6 States have no tread depth requirements
What is the average tread depth of a new radial tire?
The average tread depth of a new radial tire is typically around 10/32 to 11/32 of an inch. This tread depth provides good traction and performance while allowing for gradual wear over the lifespan of the tire.
