0
3216514635165165 3216514635165165
What else can I help you with?
What is the maximum length of an 80-wire PATA cable?
3216514635165165 3216514635165165
What is the maximum current capacity of 4 sq mm copper wire?
I can say it is 29 Amps.But again it depends on the cable length.The more the cable length is the less the current carrying capacity will be.
What has a maximum speed of 400 Mbps?
A Fire Wire 400 cable.
Is the cable length printed on the cable?
Yes, Cable length is always printed on the cable wire. As I have recently checked cables of peterstechnology.com cable length was printed with ISI certification mark & it's company logo. So anyone can easily recognize the medical cable. Thank you
What is PATA Drive?
Parallel ATA (PATA) is an IDE standard for connecting storage devices like hard drives and optical drives to themotherboard. PATA generally refers to the types of cables and connections that follow this standard.It's important to note that the term Parallel ATA used to simply be called ATA. ATA was retroactively renamed to Parallel ATA when the newer Serial ATA (SATA) standard came into being.PATA cables are long, flat cables with 40-pin connectors (in a 20x2 matrix) on either side of the cable. One end plugs into a port on the motherboard, usually labeled IDE, and the other into the back of a storage device like a hard drive.Some PATA cables have an additional connector midway through the cable for connecting yet another storage device.PATA cables come in 40-wire or 80-wire designs. Most modern storage devices require the use of the more capable 80-wire PATA cable to meet certain speed requirements. Both types of PATA cables have 40-pins and look nearly identical so telling them apart can be difficult. Usually though, the connectors on an 80-wire PATA cable will be black, gray and blue while the connectors on a 40-wire cable will only be black.Also Known As: PATANote: Even though PATA and SATA are both IDE standards, PATA (formally ATA) cables and connectors are often referred to simply as IDE cables and connectors. It's not a correct usage but it's very popular nonetheless.Examples:"My motherboard has 4 slots labeled IDE. I used a three-connector PATA cable to connect my hard drive and CD burner to one IDE port and used another PATA cable to connect my backup tape drive to the second IDE port. It's good to know that I have two more IDE ports left on the motherboard for future use if I need them."
How many pins does a PATA cable have that supports ATA-5 and UDMA66?
A PATA (Parallel ATA) cable that supports ATA-5 and UDMA66 typically has 40 pins. This 40-pin connector is used to connect devices like hard drives and CD-ROM drives to the motherboard. Additionally, there is a 80-wire version of the cable that improves data transfer rates while maintaining the same 40-pin connector.
Why extra cable is needed in wiring process?
Having extra cable at termination points is a good practice to get into. If a wire burns off of a termination point or the wire burns back on itself the whole cable does not have to be changed out. Just cut the wire in the cable back to the undamaged section and reconnect the wire. Without this extra length of cable the consumer will have to under go additional costs should a failure occur.
Why extra cable is needed in the wiring process?
Having extra cable at termination points is a good practice to get into. If a wire burns off of a termination point or the wire burns back on itself the whole cable does not have to be changed out. Just cut the wire in the cable back to the undamaged section and reconnect the wire. Without this extra length of cable the consumer will have to under go additional costs should a failure occur.
What is the maximum length of an infrared cable?
An "infrared cable" does not exist. Infrared is a wavelength of light and is used as a form of wireless transmission. You may be thinking of an infrared blaster. An infrared blaster is a wire with an infrared transmitter on one that is taped to the front of one device to emulate a remote control and is connected to another device, such as a VCR. There is no standardized length for such a cable. Since the data carried on it is serialized, likely does not need to be transmitted very fast, and is likely unshielded, such a wire could theoretically be used for several hundred feet.
Calculate capacitance of electric cable?
Basic Telephony cable is manufactured with a built in capacitance of 0.084uF (microfarads) per mile on 22-24AWG (for example) wire. Basic cable length can be estimated with a voltmeter. Messuring the amount of voltage discharged when placing the wire to ground, discharging the stored voltage in the wire.
What is the maximum length of speaker cables from a 300 watt mixer?
Using larger wire (lower AWG) will limit the loss in the cables. If you need to run a long length, use the biggest wire that will fit.
What will happens to current when cable length increases?
With a constant voltage and increase in wire length will increase the end to end resistance and therefore the current will decrease.
