0
What schedule are you asking about?
Wiki User
∙ 14y ago
Add your answer:
Earn +20 pts
What is the maximum pressure schedule 40 galvanized pipe can take?
Need to know the pipe diameter. 3 inch is the diameter of the galvanized pipe what is the working pressure of the pipe
How many gallons a minute will 4 inch pipe carry without pressure?
Nil. You need a pressure differential for flow to take place.
How do you calcuate water pressure in a pipe?
For every vertical foot of pipe, take that and multiply it by .434.This equation will get within 1/2 -1/4 psi.
How much more pressure does it take to push water up a vertical pipe than if the pipe is on a 45 degree angle?
it takes the same pressure if the vertical heights the same but since the 45 degree pipe would be longer it would create more flow restriction.
What is the hottest water a plastic PVC pipe can withstand?
PVC can take hot water like any other pipe but the reason no one wants to use it on hot water lines is because the glue joints can not take hot water so if your talking about straight pipe then it will be ale to take 212 degrees but if your talking about pipe and glue joints then it will fail around 65 + degrees F . If you want to run hot water in PVC you can use CPVC and the glue joints an pipe can with strand 212 degrees F but after some years as I have seen the pipe gets real brittle and so i always recommend the best called Wirsbo or any class AA pex
What is the pressure rating for Schedule 10 steel pipe?
The fittings THREADED are normally rated for 125 PSI but there are ratings over 3,000 PSI if needed such as high pressure steam applications Then one has to take temperature /pressure relationship into consideration higher temperature greater pressure
Tire pressure for Jeep Liberty 2003?
Tire pressure is 33psi, give or take 2 lbs. Always go by the manufacturer's recommendations for the vehicle, NOT the maximum tire pressure on the tire.
How long does PVC glue take to dry?
A PVC pipe glue will take at least 4 hours to dry. 12 hours before putting water pressure in it.
What is the pipe formula for the take off of a tee?
The same as a short radius 90 of that same pipe size. I Rule of thumb, for example: 1/2 inch copper tubing you would take off 1/2 inch, likewise 3/4 tubing take 3/4 inch. Your question is 'pipe' are you actually using pipe, cutting and threading pipe? I am often asked questions and find that people are not using 'pipe'. Copper tubing, pvc, cpvc, dwv are quite forgiving when it comes to a slight miscut. Iron and galvanized piping is a different story, get it right the first time!
How much PSI does it take to push one gallon of water through a one half inch pipe?
That would also depend on the length of the pipe, and on how fast you want the water to move. If you are in no hurry, even the slightest pressure will be enough to push the water through the pipe.That would also depend on the length of the pipe, and on how fast you want the water to move. If you are in no hurry, even the slightest pressure will be enough to push the water through the pipe.That would also depend on the length of the pipe, and on how fast you want the water to move. If you are in no hurry, even the slightest pressure will be enough to push the water through the pipe.That would also depend on the length of the pipe, and on how fast you want the water to move. If you are in no hurry, even the slightest pressure will be enough to push the water through the pipe.
What does a pump develop flow or pressure?
the pump develops pressure to have the ability to make a flow of a gas or fluid take place through a vessel, pipework or valve system, as long as there is an open end to the pipe system or vessel allowing distribution of fluid to an outlet or a return pipe back to the pump body.
Does a pump develop flow or pressure?
the pump develops pressure to have the ability to make a flow of a gas or fluid take place through a vessel, pipework or valve system, as long as there is an open end to the pipe system or vessel allowing distribution of fluid to an outlet or a return pipe back to the pump body.
