Want this question answered?
The maximum level of voltage allowed for a person to be exposed safely.
The maximum rating or a VCB is 32 KV.The maximum curent rating is up to 3000 A.
By Kirchhoff's Voltage Law, the sum of the voltage drops around the series circuit will equal the voltage applied to the circuit.
A resistor&capacitor are in series with a variable inductor.When the circuit is connected to 200v,50Hz supply,the maximum current obtained by varying the inductance is 0.314A.The voltage across capacitor,when the current in circuit is maximum is 800v.Choose the values of series circuit elements?
Voltage Rise : The energy added to a circuit. Voltage drop: The energy removed from the circuit.
The maximum level of voltage allowed for a person to be exposed safely.
For a particular frequency if the current or the voltage of the circuit is Maximum or Minimum then that circuit is said to be in resonance .
Clipping occurs in the voltage waveform when the input voltage, multiplied by the voltage gain of the op-amp circuit, exceeds the op-amp supply voltage as limited by the output network. The supply voltage and output network, limits the maximum voltage that can be achieved at the output. The op-amp behaves normally within its range of maximum voltage output, and then it is clipped when it reaches the maximum voltage of the circuit.
The maximum voltage that the electronic parts can conduct without breaking.
The maximum rating or a VCB is 32 KV.The maximum curent rating is up to 3000 A.
According to the NEC (national electric code) a maximum of 2% voltage drop is allowed.
A maximum distance of 52 feet will limit the voltage drop to 3% or less with a #12 copper conductor delivering 20 amps on a 120 volt system.
Fuses are rated by amperage (current) and voltage. The larger the current need, the larger the rating of the fuse, to handle the current. The voltage rating of a fuse defines the maximum value of circuit voltage in which the fuse can be safely used. A fuse should not be used in a circuit with a voltage exceeding the voltage rating of the fuse.
The voltage marked on a capacitor is its MAXIMUM SAFE WORKING VOLTAGE. The capacitor will work in a circuit at any voltage lower than that, but it may fail at any higher voltage.
The voltage of the bulbs is needed to answer this question. If we assume the voltage is 120 then the maximum wattage allowed on a 15 amp circuit is 1800 watts before the circuits over current device will trip. 1800/60 = 30 bulbs. To be certain that the circuit does not trip, only connect 29 bulbs to the circuit. If the circuit is considered as a continuous load then the load rating has to be reduced to 80% capacity. 1800 x .8 = 1440. With this de rating the number of bulbs allowed on the circuit would be reduced to 24 bulbs. This circuit would have to be a dedicated circuit and could not be combined with receptacles which could vary the load depending on what is plugged into them.
the electrons are not allowed to enter into the circuit.
2feet