Want this question answered?
The stitch width knob is usually located on the front of a sewing machine to determine the side-to-side motion of the needle as it stitches.
You probably need to adjust the tension knob.
The Brother "Project Runway" does have a needle-change position function.
36 inches from the floor
Make sure gas is on and shut offs are open Turn gas valve to PILOT position Push knob down and light pilot HOLD knob down for aprox. 30sec-1min Slowly release knob Pilot should stay light (if not troubleshoot) Turn know to ON position Adjust thermostat to desired position
The compass needle is attracted by the Earth's magnetic field.
u take a pair of needle nose pliers and at the front of the knob near the bottom there is a pin that loks almost like a staple just pull it out and it will come off
what is the meanig of domestic accident? what is the meanig of domestic accident?
I HAVE A JONES VX890 SEWING MACHINE. CAN YOU TELL ME WHA SETTING THE TENSION KNOB ABOVE THE NEEDLE SHOULD BE AT AND WHAT NUMBER THE KNOB ON THE RIGHT SHOULD BE. I ONLY WANT TO DO STRAIGHT STITCHING NO FANCIES.
equator
On the outside top edge of each back seat there is a knob which needs to be pulled upwards to release the lock. Similarly once in the 'down' position you need to pull the knob to release the lock. On the outside top edge of each back seat there is a knob which needs to be pulled upwards to release the lock. Similarly once in the 'down' position you need to pull the knob to release the lock.
To adjust the day hand on a puritan watch, gently pull out the crown to the first position and rotate it clockwise until the desired day is displayed. Make sure to push the crown back in after setting the day hand to ensure it stays in place.