An "operation" is one step in a manufacturing process. Typically, there are a number of operations required to manufacture any given part, and you try to do as many of them in a single machine setup as possible to save time and cost. Considering lathework, you might have a part that requires this set of steps to make: 1. Rough turn stock / 2. Final turn outside diameter. / 3. Turn snap ring groove / 4. Turn thread undercut / 5. Cut thread / 6. Knurl / 7. Face / 8. Cutoff Each of these steps would probably use a different cutting tool in the lathe, and would be an operation. Depending on the sophistication of the lathe, all the required tools might be loaded into a turret in the sequence they are required. That would be the setup.
You would either need a 4 jaw chuck or a faceplate.
knurling
The main operation in a lathe machine is to turn material. In all lathes, a piece is held and rotated around an axis while metal is cut.
On a wood turning lathe, the faceplate is screwed to the piece of wood, then the faceplate is held in place by the chuck. This facilitates free-wheeling the opposite end for such items as bowls. Almost similar to a wood turning lathe, the face plate on a metal lathe is a device that is used instead of a chuck. It allows a workpiece to be clamped or bolted to it for machining.
An operation performed on a lathe that feeds a tool at an angle to the length of the workpiece in order to create a conical shape.
it is basically used for machining..
it is basically used for machining..
While John lays next to the pool, his brother is at work machining shafts on a lathe.
Most of the metal lathe is made of cast iron.
Turning refers to rotating a part around one of its axis, then using a cutting tool to change its diameter. The machine tool designed to carry out turning is the lathe.
Rotates around its axis of the workpiece and the tool will take on the filings.
The standard accurate machining tools are the centre lathe and universal milling machine and for super finishing, the surface and rotary grinders
You would either need a 4 jaw chuck or a faceplate.
Lathe operation. Milling operation is done with its axis of rotation. The final product is always turning point in the round.
knurling
Yes. A machine tool is a power driven machine that is a tool in itself which performs machining operations.
It is a chuck that switches tools during a machining operation.