4.060"
Speed of the wave.
(a distance traveled) divided by (time to travel the distance) is known as a "speed" .
well acceleration is your velocity over time and since velocity is distance over time accelerations units are m/s^2
Motion is the measurement of an object and the change of its position over time. Acceleration is the measurement of velocity of an object. Both terms are used in physics. Acceleration denotes an increase of speed of an object while motion does not.
PSI? Pressure per square Inch (or some other measurement).
4.040"
4.310
Yes. Specialized equipment required.
A small block Chevy has a 4inch bore. When you bore one 30 what you are doing is removing .30 thousandths from the cylinder. That would make the bore 4.030 or turn a 350cid into a 355cid.
Bore it .030 over. A 350 has a 4 inch bore. When you go .030 over, the cid., becomes 355.
Its a 355 cubic inch
Most builders feel it shouldn't be bored over 4.065".
63 = 3*21 96 = 3*32 answer: 21/32
You can bore a 350 .090 over, but the thing is the bore is so big that the cylinder walls are about a hair line thickness apart. In order for the engine to accept the bore and punishment of the shear power, the 350 Block must be casted with extra carbon to strengthen the block.
.030 is the max you can bore a 92 305 i dont belive you can bore more then .030 over Some blocks you can go .40 over but the cylinders start getting thin and if you are building a H.P. engine you will have problems with overheating
I've heard of going .060" over, but most builders feel .030" over is the limit.
Take off a cylinder head and measure the diameter of the bore.