Balloon angioplasty is the procedure to flatten the plaque in a partially blocked coronary artery.
I am not a paper conservator, but this is how I've flattened old, curled photographs: Allow the photograph to absorb moisture by exposing it to relatively high humidity (do not use water directly on the print). I only flatten photographs during humid periods in the summer. Once the photograph has absorbed some moisture (allow several days in humid air), it should be more flexible and less resistent to flattening. A dry, curled photograph will resist bending, and the surface will cack easily if forced. Slowly and gently flatten the photograph using your fingers and hands. Potential damage (creases, cracks, kinks) can occur, especially at the print's edges as you press them, so go slowly and carefully. Carefully flatten the photograph and place it under a heavy, flat object. You can use a book for small prints. Place a piece of acid free paper or mat board on both sides of the print. The time to flatten the print will depend; just check it over many days or even weeks or months for the print to relax and flatten.
you take a lot of clay flatten some of it to male the walls then make the roof the same way then you can make a ground or not then you can carve a door or a window or both you can do anything on it
They will strike, like most other snakes. They flatten their heads out to make themselves look larger and they strike. They also secrete some nasty smelling white stuff. Not sure if it's defecation or not, but it is smelly.
HunterAugust 18, 2011Brightness And ContrastThe most overlooked prbeolm that most images have is that the brightness and contrast is most always off. When creating images, especially when using layers flatten and change the brightness and contrast.When you are done editing your image go toIMAGE > ADJUST > BRIGHTNESS/CONTRASTMove the contrast slider +65, you will immediately start seeing the colors pop they way they should.
Yes, depending on the reason it is warped. If the thread has shrunk, then you need to cut the thread, and repair at least three stitches on both sides of the cut. However, if the plastic is twisted, you can correct that by using a steam iron, on a low heat setting. Cover the project with a wet cloth, such as a sheet or t-shirt, and place the steaming iron in it lightly. Then put the project on a dry surface, and cover with a weight until dry. I turn a full coffee can upside down to flatten them.
photorefractive Keratectomy
Please flatten the ball of clay to make a plate.
Yes, flatten is the correct spelling.
No, every snake can flatten out. Snakes will flatten out to get through tight spaces, or some species will flatten out when they feel threatened. Also, no snake is poisonous, they are venomous.
Flattened is the past participle of flatten.
flatten it out with a twenty....lol flatten it out with a twenty....lol
Yes, colonics can flatten a tummy when the gases that are involved in digestion are released. Other ways to flatten a tummy include diet and exercise.
It usually takes at least an F4 tornado to flatten houses.
ok well you dont want to flatten it. if its cracked or bent get a new one.
Justin Bieber's hair-You do NT have to flatten it. A. use a brush and hair dryerB. flatten itBut usually it does not stick up
Glaciers
Yes it does!