It depends on: Traffic volume, design speed, Running speed, capacity of lane, and percentage of truckd
1.2metres
It depends upon the lanes: Two lane road (one lane each way) - at least 7.5 m (24.6 feet), which is one 3.75 m lane (12.3 ft)each way More than two lanes: - 3.5 m per lane e.g. 4 lane highways have two 3.5 m lanes in each direction, for a total width of at least 14 meters.
The width of one lane for a two-lane highway (one lane each way) is at least 3.75 m (12.3 feet).For four-lane highways, the width of each lane, excluding shoulders, is at least 3.5 m (11.5 feet)
It dependa on the size of the field... There is a maximum and a minimum for lenght and width.
The dimensions of the National Flag of Canada have an exact ratio of 2 to 1 (twice as long as it is wide) and must not be modified. The red band is 1/4 of the flag's width. The white band is 1/2 the flag's width.
7.5
160 feet
Malaysia minimum lane width is 2.75 meter according to JKR U2 and this width only applicable for local streets lane they have pavement roads.
The standard row width for national highways in the Philippines is 30 meters, consisting of a 20-meter road pavement and a 5-meter sidewalk on each side of the road. However, actual row widths may vary depending on the location and specific circumstances.
1.highway pvmnt (h.p) is 5-7 m width...airport pvmnt(a.p) is 45-150 m width. 2.h.p is crowned at the centre and elevated at the edges in case of super elevation...a.p is always crowned 3.in h.p , load of taffic 8170 kg/cm2 ....in a.p 10-20000 tonnes
The width of a highway would be best measured in meters. The length would be measured in kilometers.
minimum width is like 10 cm and length is like 20 cm
The Interstate Highway standards for the U.S. Interstate Highway System uses a 12-foot standard for lane width.
36"
102 inches in width
1.2metres
California