Want this question answered?
When we talk about deformatation, we are referring to two properties, namely Elasticity and Plasticity. These properties are measured using constants known as " Moduli of Elasticity". There are 4 such moduli: Young's Modulus Axial Modulus Rigidity Modulus Bulk Modulus The larger the value of the Bulk Modulus, the harder it is to compress the material.
In Design Technology, a twisting is know as TORSION
It depends on how you use it.
metronome
Type your from the hook's law, stress is directly proportional to the strain under the elastic limits. σ α ε where, σ - tensile stress. ε - strain. now σ =E ε where, E is the proportionality constant or the young's modulus of the material. the extension of the hook's law where the shear stress is directly proportional to the shear strain. ζ α γ ζ - shear stress. γ - shear strain. ζ = Gγ where G is the modulus of rigidity. A pure shear stress at a point can be alternatively presented by the normal stresses at 450 with the directions of the shear stress. σ1 = -σ2 = ζ. using this principle you get G = E/(2(1+ ν)) is the 1 equation. where, ν is the poisson's ratio.this is the basic relation between E,G, ν. the change in volume per unit volume referred to as the dilation. e = εx + εy + εz the shear strains are not taken into account because they do not contribute to any volume change. for an isotropic linearly elastic materials for use with Cartesian coordinates εx = σx/E - νσy/E - νσz/E similar equations are formed for εy ,εz . e = εx + εy + εz = ((1 - 2ν)/E)( σx+ σy+ σz) if σx= σy = σz = -p like a hydrostatic pressure of uniform intensity then -p/e = k = E/3(1 - 2ν) is the 2 equation where k is the bulk modulus. Addin 1 & 2 by bringing only the poisson's ratio to left side and taking all other constants to the right side the equation formed is the 9/E = 3/G + 1/k is the relation between the three modulus. here...
how do you find rigiedity of a penis
By using tensile test.
When we talk about deformatation, we are referring to two properties, namely Elasticity and Plasticity. These properties are measured using constants known as " Moduli of Elasticity". There are 4 such moduli: Young's Modulus Axial Modulus Rigidity Modulus Bulk Modulus The larger the value of the Bulk Modulus, the harder it is to compress the material.
A 400 day clock is another term for a torsion clock which is a device that keeps time using a torsion pendulum. It is also known as an anniversary clock.
The modulus of elasticity , E, relates tensile stress to tensile strain The modulus of rigidity, G, relates shear stress to shear strain The bulk modulus, K, relates compressive stress to volume strain The three are related using u, poisson ratio of material, that varies generally from 0 to 0.5 E = 9K/ (1 + 3K/G) G = E/2(1+u) G = 3(1-2u)K/2(1+u)
In Design Technology, a twisting is know as TORSION
we can determine YOUNG MODULUS by using the equation, w2=Exy3/4ml3 Where,x-is the width of the ruler y-is thethickness of the ruler m-mass E-young modulus of the ruler l-length of the ruler w-angular frequency
huygens
Instead of using coil springs on the front suspension torsion bars are used from the lower control arms to the frame ( my 1995 Ford Explorer 4x4 has torsion bars , my dads 73 Dodge Coronet had torsion bars ) If you look at a lower front suspension that has torsion bars you will see the torsion bars going from the lower control arms rearward
Making the length of the pendulum longer. Also, reducing gravitation (that is, using the pendulum on a low-gravity world would also increase the period).
It depends on how you use it.
metronome