thermal/heat energy
The device you are referring to is called a transformer. Not only can a transformer increase voltage, it can decrease voltage as well. These are known as a step up transformer for increasing voltages and step down for decreasing voltages.
It is not only 3 phase motor, but every electrical device heats up. The reason is the current flowing through the windings causes the I^2*R heat loss. Apart from that, in case of an induction motor, the alternate cycle of magnetization and demagnetization of core material causes the hysterisis loss and eddy current loss. Last but not the least, there are friction and windage losses for a rotating electrical machine. All of these losses are dissipated as heat energy and hence the machine heats up.
Line loss, or heating of the wires. The insulators prevent the loss of energy.
Schering bridge
fdnvjrek
The main input energy is electrical energy from mains or power sockets; that energy is transferred to light energy for the pictures, and also there is sound energy (For audio), and all these energy are converted right back at heat energy as there is always a loss of energy in every device.
An inductor is a device which stores energy as a magnetic energy.... Ideal inductor have no resistance.....so there is no power loss.... power loss = (I*I)*R
There is energy loss in heating up the wires in the motor.
Superconductors
The term, 'power loss', describes the rate of energy losses caused by the load current in the transmission lines
Electrical energy is transformed into heat and light. More specifically, electrical energy from the household wiring is turned into thermal energy (heat) by the filament which in turn becomes luminous energy (light). Some energy is lost due to resistance in the conductors.
A load loss factor, LLF,not loss load factor,Êis a calculation used by electrical utility companies to measure energy loss.Ê Its the ratio of average load loss to peak load loss.
Electrical energy is transferred into light energy, however if the light bulb is an older one, some energy will also be transferred into heat loss.
The device you are referring to is called a transformer. Not only can a transformer increase voltage, it can decrease voltage as well. These are known as a step up transformer for increasing voltages and step down for decreasing voltages.
It is not only 3 phase motor, but every electrical device heats up. The reason is the current flowing through the windings causes the I^2*R heat loss. Apart from that, in case of an induction motor, the alternate cycle of magnetization and demagnetization of core material causes the hysterisis loss and eddy current loss. Last but not the least, there are friction and windage losses for a rotating electrical machine. All of these losses are dissipated as heat energy and hence the machine heats up.
Assume no vibration loss, the amount of energy input to electric motor subtract out the converted 92 J of mechanical energy is the thermal energy produced.
Because wires are not perfect conductors, energy is released as heat. This is why electricity is transmitted at very high voltage and low current to reduce energy loss.