hi, the center terminal (attached to the wiper contact) tied to one of the ends????
yes
A variable resistor usually has three terminals, one of which is connected to the 'wiper' by which means its resistance is measured. By using all three terminals, we can control the potential difference in a circuit. When used in this way, we call the variable resistor a 'potentiometer'. By using two of the three terminals, one of which must be connected to the variable wiper, we can control the current passing through circuit. When used in this way, we call the variable resistor a 'rheostat'.
We can guess that the resistor is used for discharging the capacitor's plates. Generally we short the two terminals on a capacitor to discharge it fully. A resistor will take more time to do this than shorting-out the terminals: the higher the resistance, the longer the time that will be taken to discharge a capacitor fully.
Depending on the situation. The purpose of the rheostat is use to change the resistance of the circuit. The rheostat is use to define Ohm Laws the 2nd situation is use to find out what the fixed resistor's resistance. 3rd purpose : used to control the resistance of circuit. eg Radio
two terminals
Normally there are six terminals (two terminals per winding in 3 phase system) for a motor. If you find 12 terminals, you need to read the motor name details or specifications to get more info. The motor could be with two different sets of winding (double speed motor)
It's called a 'variable resistor'. However, it can function as a 'rheostat' (to control current) when two terminals are connected, or as a 'potentiometer' (to control voltage) when three terminals are connected. The terms, 'rheostat' and 'potentiometer' do not describe the device itself, but how it is being used.
A potentiometer and a rheostat are two different applications for a variable resistor.A potentiometer is a variable resistor, connected (using its three terminals) as a variable potential divider.A rheostat is a variable resistor, connected (using two of its three terminals) to adjust current.
Definitely two. Possibly three.
A rheostat is the name given to a variable resistor when it is used to control current. When a variable resistor is used to control voltage, we call it a potentiometer.A rheostat is connected in series with a load, and two of its three terminals are used. A potentiometer is connected in parallel with the supply, and each of its three terminals are used.So the terms 'rheostat' and 'potentiometer' are the names given to describe the function of a variable resistor, not the variable resistor itself.
If the two of the three terminals on a Potentiometer are used, then it may be used as a variable resistor.AnswerA variable resistor may function as a potentiometer (using three terminals) or as a rheostat (using two terminals). Its correct name is 'variable resistor', while the terms 'potentiometer' or 'rheostat' describe how it is being used.
A variable resistor usually has three terminals, one of which is connected to the 'wiper' by which means its resistance is measured. By using all three terminals, we can control the potential difference in a circuit. When used in this way, we call the variable resistor a 'potentiometer'. By using two of the three terminals, one of which must be connected to the variable wiper, we can control the current passing through circuit. When used in this way, we call the variable resistor a 'rheostat'.
A variable resistor usually has three terminals, one of which is connected to the 'wiper' by which means its resistance is measured. By using all three terminals, we can control the potential difference in a circuit. When used in this way, we call the variable resistor a 'potentiometer'. By using two of the three terminals, one of which must be connected to the variable wiper, we can control the current passing through circuit. When used in this way, we call the variable resistor a 'rheostat'.
Rheostat is simply a variable resistor. i.e., typically 3 contacts, either end of resistive element and slider contact that moves along resistive element. So, in old radios would typically be used as a volume control.AnswerA variable resistor may be used to control current, in which case it is called a rheostat. Or it may be used to control voltage, in which case it is called a potentiometer. In other words, the terms 'rheostat' and 'potentiometer' do not describe devices but, rather, they describe two applications of a variable resistor.As a rheostat, the variable resistor is connected in series with a load, and two of its three terminals are used -one of the fixed terminal and the slider terminal.As a potentiometer, the variable resistor is connected in parallel with a load, and each of its terminals are used. The two fixed terminals are connected across the supply, and one of the fixed terminals, together with the slider terminal, is connected across the load.
A rheostat and a potentiometer are two different applications for the same device, a variable resistor. These devices have three terminals. Two terminals are connected across the complete resistor, while the third terminal is connected to a controllable wiper. The variable resistance is provided between the wiper terminal and either one of the other two terminals.When used to control current, it is called a rheostat. When used to control voltage, it is called a potentiometer.
We can guess that the resistor is used for discharging the capacitor's plates. Generally we short the two terminals on a capacitor to discharge it fully. A resistor will take more time to do this than shorting-out the terminals: the higher the resistance, the longer the time that will be taken to discharge a capacitor fully.
Resistors are either fixed value, or variable. A variable resistor has three terminals; one at either end and one attached to a moving 'wiper', and can be connected either as a potentiometer or as a rheostat. So 'potentiometers' and a 'rheostats' are different applications for variable resistors. A potentiometer uses all three terminals, and is used to control levels of potential; whereas a rheostat uses just two of the three terminals, and is used to control current.
When we want to regulate somthing ;we use variable resistors for example :volume control in radios and volume in headset. Also , the variable resistors can forms a potential devider in which the overall resistance between the two end points remain the same,but the ratio of the two resistors in the legs changes.so the variable resistor is affectively a potential divider. Also, the variable resistor can forms a potential divider in which the overall resistance between the two end points remains the same, but the ratio of the two resistors in the legs changes. So, the variable resistor is effectively a potential divider.