0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
What is the machine used to bend acrylic in a straight line?
A strip heater
In what shapes is acrylic available in?
Strip heater-to heat up the acrylic so that you can bend straight line edges into it Acrylic drill bits-so that it is easier to drill through the acrylic Square- to check that everything is lined up correctly and is straight Solvent cement-is used to join pieces of acrylic together
What are acrylic sheets used for?
just as the name implies, an acrylic sheet is just a sheet of acrylic. Acrylic can come in a range of colours. It is brittle and is used to made things such as windscreens
What are some things one would use an acrylic sheet for?
Acrylic sheets are often used in place of glass due to the fact that it is cheaper and does not break. These can be used for greenhouses, machine guards, boat windows and sun beds.
What is acrylic cement used for?
Acrylic cemen is used to join plastics together.
Can you bend acrylic?
Acrylic or Plexiglass is bent in different ways-- one way is -- it is molded during fabrication-- and the other way is you can bend it yourself. If you have a flat piece and would like to bend it you can use a hot air blower or you can purchase an electric strap heater. Heat bars are also sold as well as heat adjusting power boxes to be used with the heat bars. With this heat bar you simply place the plastic with your marked bend line on the heat bar and plug it in-- this heat process takes just about 5 minutes for the plastic to get soft enough for you to bend the rest by hand. This is a method that requires you to use angle jigs with clamps to hold the plastic until it cools down and hardens to your desired angle. You can make your own plastic bender heating tableor you can just buy heat bars.You can use a hot air gun--or you can use a strap heater.--set your piece of plexiglass on the table with your bend line on the edge of the table. - -place the strap heater on your marked / drawn bend line and plug in the heater or you can use the hot air blower guiding it from side to side and the until the acrylic bends on its own as it heats up. I build acrylic countertop candy display units for neighborhood grocery stores-- so ask me how I knowWhat I do is I add an extra 1/4 inch to my piece of plastic so that when it bends i can use the table saw to cut the bend crease off of the side and I use a torch to re-glaze the edge of the plastic for a smoothe glass like edge.For a tutorial on bending acrylic Google Acrylic Bending for direct links to acrylic bending tutorials-- or go to Http://hackaday.com
What is the name for a machine used for removing rough edges?
A belt sander is the name for a machine used for removing rough edges.
Can acrylic paint be used on plastic?
Yes, I have successfully used acrylic paints on plastics without damaging them. Yes, I have used acrylic paints on plastics without damaging them.
What was acrylic nails used for?
acrylis was used for creating teeth and was used by a lot of dentist. then a dentist damaged his nail and put some of the acrylic on his nail and that was the first acrylic nail.
What is acrylic polymer?
Acrylic polymers are compounds produced by bonding acrylic acid or acrylic ester with other molecules. Acrylic polymers utilize the desirable characteristics of acrylic acid and acrylic ester and are used in dispersants, thickeners, adhesives, binders, and paint vehicles.
What is the definition of corian?
Corian is a solid surface material used for countertops, sinks, and other applications in both residential and commercial settings. It is a blend of acrylic polymer and natural minerals, known for its durability, versatility, and seamless appearance. Recommended: ₕₜₜₚₛ://www.dᵢgᵢₛₜₒᵣₑ₂₄.cₒₘ/ᵣₑdᵢᵣ/₃₄₉₁₁₃/ᵥᵢₖₐₛbₐbbₐᵣ₀₀₁/
What is a machine used to make or fix clothing?
The name of the machine used for making and repairing clothes is called a sewing machine.
