Want this question answered?
A light bulb can be part of a circuit.
In an incandescent light bulb this is the filament. It is usually made of tungsten.
the light bolb
Tube, bulb, envelope, globe.
Yes. Part of the energy is converted to light, part to heat. The percentage depends on the type of light bulb. Fluorescent and LED light bulbs are more efficient than incandescent light bulbs. A 60-watt incandescent bulb will be uncomfortable to remove from the socket with your bare hands after turning it off. However, a 100-watt bulb will burn you if you remove it with your bare hands after turning it off.
the filament
It's the small coil of very fine tungsten wire that glows white hot.
the actual filament itself in a light bulb has the most resistance,this is why it glows and produces light,the rest of the bulb is sufficiently engineered to carry the voltage and current applied to it without producing too much heat.
In an old-fashioned light bulb, the part that emits light is a resistance. When current flows through it, it heats up so much that it glows - it emits light.Due to their lousy efficiency, these light bulbs should be discarded, in favor of fluorescent light bulbs or LED light bulbs.In an old-fashioned light bulb, the part that emits light is a resistance. When current flows through it, it heats up so much that it glows - it emits light.Due to their lousy efficiency, these light bulbs should be discarded, in favor of fluorescent light bulbs or LED light bulbs.In an old-fashioned light bulb, the part that emits light is a resistance. When current flows through it, it heats up so much that it glows - it emits light.Due to their lousy efficiency, these light bulbs should be discarded, in favor of fluorescent light bulbs or LED light bulbs.In an old-fashioned light bulb, the part that emits light is a resistance. When current flows through it, it heats up so much that it glows - it emits light.Due to their lousy efficiency, these light bulbs should be discarded, in favor of fluorescent light bulbs or LED light bulbs.
In an incandescent lamp, it is called a filament. It is usually made out of Tungsten. The resistance in the filament causes it to heat up, and then glow. In a neon lamp it is plasma, which is an ionized gas. In a fluorescent bulb mercury vapor is ionized to produce UV radiation, that hits the phosphor coating on the outside of the bulb and that glows.
A light bulb can be part of a circuit.
"light bulb" is a noun.
Because it is made to do so. An incandescent light bulb glows because electricity heats the filament until it is very hot and excites the atoms so much they emit "black body" radiation, much of which is in the visible part of the spectrum.
no it is where the gray or black part at
That part of a light bulb that causes light to light up is called the filament, and it is typically made from tungsten.
First let us understand the different parts that go to make up the light bulb shall we? The key component in a light bulb is the filament, this filament, ususually a thin piece of wire, is connected to two contact points. These points are then connected to the metal base of the bulb. When the bulb is attached to the light socket a circuit is then made. As the thin wire is part of the circuit it will have electicity passing through it when the power is switched on. The bulb glows because of the filament is thinner than that of the rest of the circuit. The filament gives off heat energy and begins to glow, this glowing we call light energy. You now have two forms of energy.
In an incandescent light bulb this is the filament. It is usually made of tungsten.