200 yards to 200 feet is easy, just divide by three.
0.09 square inches means the new wire has about 1.9 times the cross-sectional area of the old one (assuming CM means circular mils). So that would reduce the resistance by a further factor of 1.9.
All told, I'm getting somewhere in the vicinity of 166 "m ohms" (milliohms?).
I did not understand .I'm talking Arabic
Around 50000 to 60000 seats
based on information reported on PayScale a civil engineer with 6 years of experience in Denmark would be paid 60000 euros
The average salary of a robotics engineer is $52,857 per year. Some robotics engineers can earn up to $75,865 per year.
100 is to 800 as 75 is to X. Cross multiply, 100 x X and 800 x 75, 100X = 60000. To get rid of the 100 divide it into both sides of the equation. X = 600. If the copper loss is linear, at 75 percent the copper loss will be 600 watts.
Grade 60 has a tensile stress of 60000 psi while Grade 40 has 40000. Grade 60 steel rusts faster than grade 40. grade 60 bar can be identified by the word 60 which should have printed on that while on grade 40 no no will be printed or written and we can identify this by counting the lines on steel as well. If there are 3 lines longitudinally on the bar its is of 60 grade and if 2 lines longitudinally it will be identified as 40 grade.
what needs to be changed on this service
no
every 60000 thousand Miles
No, one is a measure of length and the other is a measure of volume.
it should be changed after 60000 miles
yes and it should be changed every 60000 miles
33% of 60000 = 33% * 60000 = 0.33 * 60000 = 19,800
12% of 60000= 12% * 60000= 0.12 * 60000= 7200
83% of 60000= 83% * 60000= 0.83 * 60000= 49,800
9.5% of 60000= 9.5% * 60000= 0.095 * 60000= 5700
23% of 60000= 23% * 60000= 0.23 * 60000= 13,800
half of a percent of 60000 = 3001/2% of 60000= 1/2% * 60000= 0.005 * 60000= 300