Want this question answered?
One cubic meter of rough (paddy) rice weighs about 577 kilograms or 1,273 pounds.
100
.163
By a 'kilo' I assume you mean a kilogram, but this is a weight. A cubic meter is a volume. You can't compare them. You have to specify what the material is, to know the volume of a 'kilo', before you can work out how many in a cubic meter
'Dimensional weight' is a strange term, what is it? If your packages are 22 x 15 x 11 inches, each one is 3630 cubic inches, not 3707. If the trailer is 1842 cubic feet (not cubic square feet which is meaningless), then we can calculate as follows. Each package is 3630 cubic inches. To put this into cubic feet we have to divide by 12 to the power 3, which is 12 x 12 x12 =1728. Therefore each package is 3630/1728 cubic feet, or 2.10 cubic feet. Therefore the trailer will take 1842/2.10 packages =877.
28.60kn
what is the weight of concrete block work per cubic meter.
it has approximately 500 bricks and weight may range from 1510-2000 kg
One cubic meter of rough (paddy) rice weighs about 577 kilograms or 1,273 pounds.
There is cubic volume or there is weight but not cubic weight.
one cubic meter is equivalent to 1000 cubic decimeters or 1000 liters. assuming the amount of mortar used has a volume of 2/3 of 1 brick (figuring on standard red brick of 2.5 x 5 x 10 inch bricks) per brick, then the amount of mortar used will be about 333 1/3 liters. if 1/3 of the volume of the mortar is water then the dry ingredients are equal to 222.222 liters. of that: 1/6 of the dry ingredients are portland cement if you are using a 3:2:1 (sand, lime, cement) or 37.04 liters.
what is the standard mass of a concrete masonry unit that is 7 5/8 x 7 5/8 x 15 7/8 in cubic inches
On a per-foot basis, it would be the thickness of the wall in feet multiplied by the height in feet multiplied by the combined density of the brick and mortar. My AISC manual has 120 lbs per cubic foot for a normal brick wall, so a typical single wythe wall (4" thick) would weigh 40 lbs square foot of face area.
Assuming the standard size of a red clay brick 4"x8"x2-1/4", (1) CY of bricks would weight 6,912 lbs, or 3.46 tons.
14.5 Cubic Inches.
Masonry sand is estimated to weigh approximately 160 pounds per cubic foot. Therefore, it would take 12.5 cubic feet of masonry sand to equal one ton.
One cubic foot of common red brick weigh 120 pounds. For fire clay bricks, the weight is 150 pounds per cubic foot.