answersLogoWhite

0


Want this question answered?

Be notified when an answer is posted

Add your answer:

Earn +20 pts
Q: What is the number 3 and L on a transmission gear selection?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

The engine crankshaft and transmission input shaft are turning how many times faster than the transmission output shaft when a manual transmission is in first gear?

3,because the gear ratio in a manual transmission results is a gear ratio of about 3:1 for first gear.


What is the difference between 'drive' and third gear?

Some automatic transmissions have 4, 5 or even 6 gears. "Drive" just means the transmission gets to pick whichever gear is appropriate; If your shifter has a "3rd gear" selection, it limits the transmission to pick from gears 1, 2 or 3. It can be used to accelerate uphill better, or when towing a trailer.


What is wrong with your 1997 grand am standard when all you can get is gear 1 gear 3 and gear 5 and Gears 2 gear 4 and Reverse does not work What is the problem?

the transmission is failling or starting to go bad so get it fixed or get a new transmission the transmission is going bad


Will a gear box from a 1968 Chevy truck work in 1967 Chevy truck?

Need more info, manual steering gear box, power steering gear box, 3 speed standard transmission box, or 4 speed transmission box? The truck has a 3 speed manual transmission and power steering gear box thanks The steering gear box will interchange.


What is d 3 drive on a Honda CR-V?

D3 means that the vehicle transmission will shift through 3 forward gears (low gear/2nd gear/high gear). D2 indicates only low gear & second gear. Your vehicle will NOT shift into OverDrive unless the transmission is in D3 position.


What is the gear ratio on the front differential on a 1994 suzuki sidekick?

There are four ways to find a ratio. 1 A dealer can normally tell from the vin number. 2 There are normally tags or labels on the axle that have part number, gear ratio, and fluid requirement info. 3 You can count how many times you have to turn the driveshaft to get one complete turn of the tires. 4 You can count the number of teeth on the ring gear and divide by number of teeth on the pinion gear. As I recall: 4.62 Automatic Transmission. 5.12 Manual Transmission (5 Speed)


What are the signs of an automatic transmission probelm?

There can be a number of problems that indicate that a transmission is failing; 1. slipping 2. failure to go into gear 3. leaking 4. noises 5. failure to shift at the right speed


What is trouble code p1705 for honda odyssey 2001?

Definition Stuck in 2nd or 3rd gear Probable cause 1. Open or short circuit condition in the gear selection switch circuit 2 Poor electrical connection 3 Failed gear selection switch


What type of transmission fluid do you use in the 1966 3 speed manual transmission 200 cylinder mustang?

That transmission uses 80-90w gear oil.


1991 geo tracker automatic transmission will not shift into 4th gear?

It's a 3 speed transmission. Standard Trannys were 5 speed, but autos only have 3.


How many quarts of gear oil in the transmission on a 1992 Nissan NX 5 speed?

A 1992 Nissan NX 5speed will use approximately 3 to 4 quarts of gear oil in the transmission. The gear oil can be purchased at any auto parts store.


Is a transmission with 3 speeds plus OD called a 3 speed or a 4 speed?

4 speed. There are three speeds in which the transmission permits more slippage between the engine flywheel and the torque converter. The OD, or "overdrive" gear is a fourth gear that creates a direct mechanical connection between the transmission and engine. This creates a higher gear ratio that improves gas mileage.