that depends on the microcontroller. check the datasheet.
The 8086 Microprocessor operate to require frequency that is provided by clock generator to 8086 Microprocessor and also Synchronization various component of 8086.
It is mightily referring to Microprocessor 8086 . I think you saw "8086 microprocessor". The 8086 is nothing it indicates the number of microprocessor same as Digital or analog ic's . 8086 microprocessor has 20 Address buses and 8 data buses which has 1 Mb inbuilt memory for performing several type of airthmatical and logical operation.
BHE is used to enable the high order bus so as to differentiate between a word operation and a byte operation.
The frequency of operation was decided by the government before they started building their power plants.
increment and decrement operations ie INC and DEC
Can be any frequency but is most likely to be the grid frequency - 50/60 Hz.
Large frequency resolution and low frequency of operation
The data bus of 8085 is 8 bit.Its operating frequency is 3.03 Mhz.Address bus is 16 bit. The data bus of 8086 is 16 bit.Its operating sfrequency is 5 MHZ.Address bus is 20 bit.
Transforming a signal without changing its frequency.(amplitude can be changed)
To exchange two registers, say the BX and CX registers, in the 8086 using the stack, you can use...PUSH BXPUSH CXPOP BXPOP CX... Of course, this is for 16 bit operation. If you want 8 bit operation, you will need to do more than that, because stack operations are always 16-bit operations.
8086 main application is to evaluate the arithmetic operations in any systems that uses 8086