There are opposites of some adverbs and adjectives. The idea of "opposites" is conceptually weak and not all words have opposites.
If a vector, of magnitude v, makes an angle of Φ with the adjacent side then the adjacent component = v*cos(Φ), and opposite component = v*sin(Φ)
The resultant vector describes the complete vector, magnitude and direction; while the component vector describes a single component of a vector, like the x-component. If the resultant vector has only one component, the resultant and the component are the same and there is no difference.t
The opposite (antonym) of opposite is same.
opposite of opposite to opposite from
there is a variable component of motion in the direction at right angles to the direction of propagation of the wave.acceleration is directly proportional to displacement from the direction of propagation of the wave, andthe direction of acceleration is opposite to that of the displacement.
If a vector, of magnitude v, makes an angle of Φ with the adjacent side then the adjacent component = v*cos(Φ), and opposite component = v*sin(Φ)
it is the flux which is flowing opposite to the main field flux and demaganetize it... in order to eliminate this demagnetiszing component we have to connect the compensating winding in series with the armature winding which develop the flux in it oppose to the demagnetizing component
opposite direction.
When the component vectors have equal or opposite directions (sin(Θ) = 0) i.e. the vectors are parallel.
It is the component of the earths magnet field which aligns the compass needle to the Magnetic North Pole. The Horizontal Component (directive force) is the greatest at the magnetic Equator (Aclinic Line), where the vertical component is the weakest. Above the magnetic north pole, it is the opposite. The Horizontal, or directive force is weakest and the vertical component is the strongest.
It is not the "opposite" but the major alternative to parallel, which is a series circuit. In parallel circuits, each component has its own circuit path (input to output), while in series the components are connected to one another in a line.
It is not the "opposite" but the major alternative to parallel, which is a series circuit. In parallel circuits, each component has its own circuit path (input to output), while in series the components are connected to one another in a line.
Analysis of circular polarization (CP) utilizes two independent, orthogonal, components: right- and left-hand circular (RHC and LHC). The desirable component, having the intended sence of rotation (right, or left), is called the copolarization component. The undesirable component, with the opposite polarization, is called the crosspolarization component. The mix of copolarization and crosspolarization components determine the quality of CP and correlates with the axial ratio.
Take the component of the acceleration along the direction the object is moving. If this component is positive (the acceleration vector, or the relevant component, points in the same direction as the movement), then the object is speeding up.
You have a right triangle and can use trig. Degree mode. tan(theta) = adjacent/opposite( y component ) tan( 60 degrees) = (5 m/s)/(y comp.) y component = 5 m/s)/(tan 60 degrees) = 2.887 m/s ( you can call it 3 m/s ) -----------------------------------------------
component one component two component three component four component five
A discrete component is one where the package contains only one circuit element. The opposite is an "integrated circuit" (aka a "silicon chip" or "chip") where a package contains many circuit elements. It's not that "discrete" is a type of resistor, it's that a resistor is a type of discrete component.