Want this question answered?
The power output of a motor can be changed by the use of gears. Gears can be used to increase torque by reducing the speed of the output shaft by placing a large gear on the output shaft, coupled to a smaller gear. Conversely, by using a small gear on the output shaft, coupled to a larger gear, the speed can be increased with a reduction in torque.
Stoll condition of a motor or Stall torque is the torque which is produced by a device when the output rotational speed is zero. It may also mean the torque load that causes the output rotational speed of a device to become zero - i.e. to cause stalling.Stalling is a condition when the motor stops rotating.This condition occurs when the load torque is greater than the motor shaft torque i.e. break down condition.In this condition the motor draws maximum current but the motor does not rotate.The current is called as Stalling current.
Torque = Force x Distance eg i sit on a bench 2 metres from the left supporting force. I way 60kg. I am then creating a clockwise torque of 60 x 9.8 x 2 (9.8 because that is equal to gravity) so 60 x 9.8 is my weight force (force) which is 588 Newtons. To calculate torque I then multiply that by the distance of 2 metres. So i would be creating a torque of 1176Nm. P.S a common misconception is that a scale like the one in your bathroom measures weight. That's wrong, the scale measures mass. Weight is a force and must be measured in Newtons. That is why i multiplied by gravity (9.8). mass x gravity = weight.
what are the piston footpounds for a chevy 350 If you're asking about the output of the engine, it varies a lot depending on what the engine was built for.
For a mechanical engine, such as a steam engine, or an automotive engine, two parameters are important. These are the power output at a given speed, and the torque available at that speed.The power would be measured in Horsepower, and the torque in foot-pounds. [In Imperial units.]In metric units those would be kilowatts, and Newton-meters. It would be normal to make a plot of these parameters at various speeds.
NO. not at all b/c torque is directly related to force
Torque output of the engine at that speed.
Jobs that require a pneumatic torque wrench include jobs that require mechanical work. This includes car mechanics, which use these wrenches to change lug nuts on a wheel.
how calculate power gearbox output
The torque applied to the drive is adjusted by instructing the engine to increase or decrease output.
Power in watts which can be directly converted to horsepower. RMS wattage is the true measure of the ability to do work. Torque in foot pounds can be a measurement of instantaneous energy.
Torque is a force times a distance (the distance from the rotation axis where the force is applied). The angle at which the force is applied can also play a role. It is not directly related to speed.Torque is a force times a distance (the distance from the rotation axis where the force is applied). The angle at which the force is applied can also play a role. It is not directly related to speed.Torque is a force times a distance (the distance from the rotation axis where the force is applied). The angle at which the force is applied can also play a role. It is not directly related to speed.Torque is a force times a distance (the distance from the rotation axis where the force is applied). The angle at which the force is applied can also play a role. It is not directly related to speed.
MA = Revolutions of input shaft / Revolutions of output shaft. (Input torque * MA) * efficiency = Output torque Note 100% efficiency = 1.0
The torque converter is located between the engine output shaft and the transmission. Have to drop transmission to remove.
The driver gear has the input torque, and the driven gear has the output torque.
The driver gear has the input torque, and the driven gear has the output torque.
Foot Pounds