The 100GHz frequency has the shortest wavelength.
10MHz
Answer:- 500MHz From:- Joginder Kumar Network Engineer Datacraft India Ltd.
20PU = 20mhz clock 10PU = 10mhz clock note that these are the maximum clock speeds. voltage and settings will apply also. I believe most AVR's default to 1mhz until you have set the specified fuse setting.
The length of a wave is denoted by its wavelength, which is found by dividing the speed of light, or c, (3 x 108 m/s) by the frequency (88 x 106 Hz). The answer is 3.4 meters.
It's a VERY vague distinction - but HS (High Speed) gives more drive to the crystal. There's no specific changeover point - but 4MHz would be XT, and 20MHz would be HS. Often either will work, but perhaps a reasonable changeover would be 10MHz?, or even 4MHz and below is XT, and anything higher is HS?. hope this will help
after Jurrasic period it is the Cretaceous period
It's a VERY vague distinction - but HS (High Speed) gives more drive to the crystal. There's no specific changeover point - but 4MHz would be XT, and 20MHz would be HS. Often either will work, but perhaps a reasonable changeover would be 10MHz?, or even 4MHz and below is XT, and anything higher is HS?. hope this will help
1st period -Formative Period 2nd period-International Period 3rd period -National Period 4th period -World Music Period
you are on your period
The period after the Devonian Period (416 to 359.2Ma) is the Carboniferous Period (359.2 to 299Ma).
There are many famous periods in Japanese History. * Edo Period * Meiji Period * Jomon Period * Yayoi Period * Kofun Period * Nara Period