Pangit ka
The problem is in the mechanism which is used to connect computers. If you use shared LAN (hubs) it means that if you have 10BaseT connection it will shared among all connected computers. Thus you have 10 Mbps available for all computers together. When you are using 10BaseT switched, it means that each computer in your network will have a separate connection of 10 Mbps.
the network administrator uses the OSI model to troubleshoot network problem by verifying functionality of each layer, in many cases, troubleshooting the network problem requires the network administrator to isolate at what layer the network problem occurs. network administrators often describe networking problems by layer number, for example, a physical link problem is described as a layer 1 problem; a router problem is a layer 3.
Its an issue in your phones network, to solve problem you need to consult you phones network. There is no problem with your phone
window network diagnostics
Network monitoring is generally referred to as the use of one system that monitors all activities on the network. If a problem is detected within the network, like a failing component of the network, the network administrator is then notified so that they may deal with and correct the problem very quickly or as quick as possible.
Most likely the mainframe is not the problem. Sounds more like a network problem, which can be many different factors. A network technician should run a network analysis report to pin-point the problem.
If you can connect to other computers on the same network, but you can't connect outside the network, the problem is quite often that the default gateway has not been configured correctly.If you can connect to other computers on the same network, but you can't connect outside the network, the problem is quite often that the default gateway has not been configured correctly.If you can connect to other computers on the same network, but you can't connect outside the network, the problem is quite often that the default gateway has not been configured correctly.If you can connect to other computers on the same network, but you can't connect outside the network, the problem is quite often that the default gateway has not been configured correctly.
To solve a problem with booting which requires access to the network to solve the problem Safe Mode boots the OS with minimum configuration and can be used to solve problems with a new hardware installation or problems caused by user settings
The maximum flow problem is a mathematical optimization problem that involves finding the maximum amount of flow that can be sent through a network from a source to a sink. It is used in network optimization to determine the most efficient way to route resources or information through a network, such as in transportation systems or communication networks. By solving the maximum flow problem, optimal routes can be identified to minimize congestion and maximize efficiency in the network.
no it cancelled
exceeding the maximum network lenght
You can buy USB network card, it will solve your problem.