Want this question answered?
Pressure = Force/Area Pressure = 9 Newtons/0.3 m2 Pressure is 30 Pascals
Mega means million. So if you have the number of Pascals and want to convert to mega Pascals just divide by 1,000,000.
You can't. Pascals (pa) area messurement of pressure. CFM (cubic feet per minute) is a rate of flow. However, there is a device called a manometer which is used to measure either pressure(in pascals) or air flow in(in cubic feet). Most commonly used for blower door tests.
Pressure is the ratio of a force acting over (pressing on, or pushing against) a certain area. Pressure is measured in pascals, named after the 17th century French scientist Blaise Pascal. One pascal (Pa) is the pressure from a force of one newton(N) pressing on an area of one square metre (m2). Pa = N/m2. Five newtons acting on one square metre would be five pascals. Five newtons acting on two square metre would be two and a half pascals. Five newtons acting on five square metre would be one pascal.
according to pascals law pressure is transmitted equally and undiminised in all direction. So Force=pressure x area. such machines one side area is small and other side is large. A small force is applied to small area and according to the equation it produces large force.,
pressure is force divided by area. If area is 1.6m^2 then pressure is 560/1.6 = 350 pascals
Pressure = Force/Area Pressure = 9 Newtons/0.3 m2 Pressure is 30 Pascals
The pressure measured in pascals means the force in newtons per area in square meters. Pascals cannot converted to newtons, because the area is missing. Pascals means pressure and newtons means force.
The formula for pressure is: pressure= force divided by area The unit for pressure is: pascals (p) Enjoy:)
Force divided by area is pressure. If the force is in newtons and the area is in metres squared, the pressure will be in pascals (Pa).
Pressure is defined as the force per unit area. It is expressed in Pascals
1400pa
30cm2
Pascals are a unit of pressure. pressure = Force / area being acted on. Therefore: Force = Pressure x Area being acted upon.
The basic S>I> units for Pascals, is kg m s^-2 / m^2 . That is Force divided by Area. Hence Pressure(Pa) = force/ area. Algebraically rearraning Force = Pascals X Area. Hence Force = 99500 X 2.5 = 248750 kg m s^-2 ( Newtons).
When area of contact increases between two objects, then the pressure applied decreases. Here is the formula: Pressure(Pascals)=Force(newtons)/area(metre2)
This is to do with pressure. Pressure is a measure of force over an area. In SI units it's measured in Pascals. Pressure (Pascals) = Force (Newtons) / Area (square metres) A "sharp" pin has a smaller area in contact with the wall as you try to push it in so the pressure on the wall will be greater for the same force. It'll feel easier to push it in.